User manual MAKITA GS120

[. . . ] Like our chain saws, the DOLMAR Power Cuts feature specially designed high-performance engines with outstanding power-to-weight ratios, for heavy-duty yet lightweight tools. Other advantages of the DOLMAR Power Cuts: • Sturdy construction and high reliability. • Maintenance-free electronic ignition , hermetically sealed to protect against dust and moisture. €¢ Vibration damping with the DOLMAR 2-mass system (D2M) for tireless working even when guiding the Power Cut by hand. [. . . ] 5 5 Place the cutting disc (5) on the arbour (7). CAUTION: 7 When using a diamond cutting disc be sure to mount it so that it rotates in the proper direction!C 8 9 Place the spring washer (8) on the arbour and insert the screw (C/9) and tighten by hand. 10 8 Slowly turn the cutting disc until the stop hole of the V-belt wheel is visible in the drive-arm hole (10). Insert the Allen key (2) as far as it will go. 2 1 Tighten the screw with the combination wrench (1) NOTE: Tighten the screw firmly (30 ± 2 Nm), as otherwise the cutting wheel may slip during cutting. D 12 Tightening the V-belt / Checking V-belt tension IMPORTANT: Exact V-belt tension is essential for maximum cutting performance with minimum fuel consumption. Improper V-belt tension will result in premature wear to the V-belt and V-belt wheel or damage to the clutch bearing. STOP E NOTE: The two fastening nuts (11) must be loosened before tightening the V-belt or checking the tension. To increase the belt tension, turn the tightening screw (12) to the right (clockwise) with the combination wrench included with the Power Cut. The belt tension is correctly adjusted when the nut (13) is centred on the mark (14). Buy only as much as you will use in 4 weeks. store fuel only in approved and marked containers. AVOID SKIN AND EYE CONTACT Mineral oil products degrease your skin. store fuel only in approved and marked containers. in addition , allergic reactions are known to occur. Eyes can be irritated by contact with oil. If oil comes into your eyes, immediately wash them with clear water. If your eyes are still irritated, see a doctor immediately! a STOP Refuelling IMPORTANT: FOLLOW THE SAFETY PRECAUTIONS!Be careful and cautious when handling fuels. The engine must be turned off and cooled down! [. . . ] Use only original DOLMAR parts, marked Only original parts are from the same production line as the original unit and therefore ensure the highest possible quality of materials, dimensions, functioning and safety. Only original spare parts and accessories guarantee the highest quality in material, dimensions, functioning and safety. Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations. [. . . ]