User manual MAKITA HU01

[. . . ] Model Blade length Strokes per minute Overall length Net weight Rated voltage Standard battery cartridge · Specifications and battery cartridge may differ from country to country. ⷠWeight, with battery cartridge, according to EPTA-Procedure 01/2003 Due to our continuing programme of research and development, the specifications herein are subject to change without notice. The following show the symbols used for the equipment. Be sure that you understand their meaning before use. [. . . ] Check with local codes for possible special disposal instructions. do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. Always remove the battery cartridge from the equipment: - whenever leaving the equipment unattended; - before clearing a blockage; - before checking, cleaning or working on the equipment; - after striking a foreign object; - whenever the equipment starts vibrating abnormally. Always ensure that the ventilation openings are kept clear of debris. Employ only the correct cutting tool for the job in hand. The condition of the equipment, in particular of the cutting tool of the protective devices must be checked before commencing work. Turn off the motor and remove the battery cartridge before carrying out maintenance, replacing cutting tools or cleaning the equipment or cutting tool. Check loose fasteners and damaged parts such as cracks in the cutting attachment. When not in use, store the equipment indoors in dry and high or locked-up place - out of the reach of children. Use only the manufacturer's recommended replacement parts and accessories. inspect and maintain the equipment regularly , especially before/after use. Have the equipment repaired only by our authorized service center. Keep handles dry, clean and free from oil and grease. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 C (122 F). [. . . ] CAUTION: Smear the blade before and once per hour during operation using machine oil or similars. avoid operating the tool under the scorching sunlight as much as practicable. When operating the tool, be careful of your physical conditions. To remove the base frame, upset the tool and take it out of the groove grabbing its bottom. [. . . ]