Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA JR3000. We hope that this MAKITA JR3000 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA JR3000.
You may also download the following manuals related to this product:
MAKITA JR3000 PARTS LIST (231 ko) MAKITA JR3000 ANNEXE 927 (72 ko)
Manual abstract: user guide MAKITA JR3000
Detailed instructions for use are in the User's Guide.
[. . . ] Important: Always be sure that the machine is switched off and unplugged before installing or removing the blade. First, use the hex wrench to loosen the bolt. With the blade teeth facing upward or downward, insert the blade until the hole in the blade shank is just over the protrusion on the slider. [. . . ] CAUTION: Use the speed change switch only after the machine comes to a complete stop. To change the machine speed, move the speed change switch to the ``L'' position for low speed or the ``H'' position for high speed. CAUTION: Before plugging the machine, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. For machines with lock button To start the machine, simply pull the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the machine from the locked position, pull the trigger fully, then release it. For machines with lock-off button To prevent the trigger from being accidentally pulled, a lock-off button is provided. Turn the machine on and wait until the blade attains full speed. Then press the shoe against the workpiece and apply pressure to cut the workpiece. CAUTION: Excessive pressure that causes bending or twisting of the blade may snap it. Always use a suitable coolant (cutting oil) when cutting metal. CAUTION: Before plugging the machine, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. For machines with lock button To start the machine, simply pull the trigger. Machine speed is increased by increasing pressure on the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the machine from the locked position, pull the trigger fully, then release it. [. . . ] Both identical carbon brushes should be replaced at the same time. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service Center. Damage attributable to normal wear and tear, overload or improper handling will be excluded from the guarantee. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA JR3000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA JR3000 will begin.
MAKITA JR3000 PARTS LIST (231 ko)
