User manual MAKITA JS8000

[. . . ] cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool. [. . . ] Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of electric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to shears safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. It is also recommended that you put on thickly bottomed shoes to prevent injury. Otherwise it can cause damage and trouble on the tool. Be sure no one is below when using the tool in high locations. Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin. It can cause serious accident by electric shock. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. When using the hook, pull it out in "A" direction and then push it in "B" direction to secure in place. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. When not using the hook, return it back to its initial position by following the above procedures in reverse. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. [. . . ] To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. [. . . ]