User manual MAKITA LM430D

[. . . ] Be sure that you understand their meaning before use. €¢ The distance between the tool and bystanders must be at least 15 m. 13 • Never put your hands and feet near the blade under the mower. €¢ Remove the lock key before inspecting, adjusting, cleaning, servicing, leaving and storing the mower. [. . . ] Open out the battery cover on the mower and then slide all the way and click the product mounting adapter of the BCV01 into the battery port on the mower. Run the cord of the BCV01 through the slit in the battery cover and close the battery cover. Fit the cord of the BCV01 into the upper holders on the handle. NOTE: • When using the battery converter BCV01 (optional accessory), hook the power cord to the designated holder on the mower. Failure to do so may cause the cord to be cut off. To remove the BCV01 from the mower, open out the battery cover and then press the hook on the battery mounting side of the BCV01. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Charge the battery cartridge with room temperature at 10°C – 40°C (50°F – 104°F). let a hot battery cartridge cool down before charging it. Charge the battery cartridge once in every six months if you do not use it for a long period of time. 6 & 7) Open the battery cover and click in the BCV02 into the battery port on the mower. To remove the BCV02, press on the hook of the BCV02 and withdraw it with both hands. 8 & 9) WARNING: • Before inserting the battery cartridge in the tool, always check to see that the switch lever actuates properly and returns to the original position when released. Operating a tool with a switch that does not actuate properly can lead to loss of control and serious personal injury. NOTE: • Trying to mow much grass at a time may not allow the motor to start due to the overload. At this time, change the mowing height to higher level to restart. €¢ The mower does not start without pressing the switch button even if the switch lever is squeezed. This mower is equipped with the interlock switch and handle switch. If you notice anything unusual with either of these switches, stop operation immediately and have them checked by your nearest Makita Authorized Service Center. Insert the lock key into the interlock switch. Pull the switch lever toward you while depressing the switch button. [. . . ] Battery problem (under voltage) The lock key is not inserted. The drive system does not work correctly. Cutting tool does not rotate: Stop the machine immediately! abnormal vibration: Stop the machine immediately! [. . . ]