User manual MAKITA MS260U

[. . . ] 14 Cd Ni-MH Li-ion • Only for EU countries Do not dispose of electric equipment or battery pack together with household waste material!In observance of European Directive 2002/96/EC on waste electric and electronic equipment, 2006/66/EC on batteries and accumulators and waste batteries and accumulators and their implementation in accordance with national laws, electric equipment and battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. 16 ENGLISH (Original instructions) Explanation of general view 1 2 3 4 5 6 7 8 9 10 11 12 13 Battery cover locking lever Battery cartridge Battery cover Lock key Battery converter (BCV01) Installation hole Hook Product mounting adapter of the BCV01 Cord Slit Upper holders Battery converter (BCV02) Switch button 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Switch lever Mowing height adjusting lever Indicator lamps CHECK button Lower handle Groove on the deck Clamping screw Upper handle Screw holes Clamping nut Screw Holders Screwdriver Blade 28 29 30 31 32 33 34 35 36 37 38 Bolt Inner flange Arrow Outer flange Rear guard Groove Grass basket Expand Move down forward Pivot back Front grip SPECIFICATIONS Model Mowing width No load speed Dimensions (L x W x H) Net weight Rated voltage Standard battery cartridge(s) Warning: Use only the battery cartridge(s) described. €¢ Due to our continuing program of research and development, the specifications herein are subject to change without notice. [. . . ] If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. Be careful not to drop or strike battery. Battery converters (optional accessory) WARNING: • Before installing or removing the battery converters BCV01/BCV02, remove the lock key. 3, 4 & 5) WARNING: • When using the BCV01, never attach it to any part of your body. Attaching the BCV01 to any part of your body may cause a serious injury. Slide the battery converter BCV01 into the installation hole until it stops. Release the switch button as soon as the motor starts running. The mower will continue to run until you release the switch lever. Release the switch lever to stop the motor. Store the lock key in a safe place out of reach of children. Battery protection system Lithium-ion batteries are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life. In this situation, release the trigger switch on the tool and stop the application that caused the tool to become overloaded. Then pull the trigger switch again to restart. If the tool does not start, the battery is overheated. In this situation, let the battery cool before pulling the trigger switch again. €¢ Low battery voltage: The remaining battery capacity is too low and the tool will not operate. [. . . ] To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 22 TROUBLE SHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. [. . . ]