User manual MAKITA MT065SK2

[. . . ] Do not use tools for purposes not intended. Do not wear loose clothing or jewellery, they can be caught in moving parts. Non-skid footwear is recommended when working outdoors. Wear protecting hair covering to contain long hair. [. . . ] Incorrect reassembly may result in a risk of electric shock or fire. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. The battery charger is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the battery charger. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them 2. 3. 4. 9. ADDITIONAL SAFETY RULES FOR TOOL 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Be sure no one is below when using the tool in high locations. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. 10. 11. 2. 12. 3. 3 out with clear water and seek medical attention right away. It may result in loss of your eyesight. be collected separately and returned to an environmentally compatible recycling facility. ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge battery cartridge when temperature is BELOW 10 C (50 F) or ABOVE 40 C (104 F). Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. Do not allow anything to cover or clog the charger vents. Always cover the battery terminals with the battery cover when the battery cartridge is not used. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. [. . . ] NOTE: · Do not operate the tool with the adjusting ring set between the number 19 and the marking. The tool may be damaged. · Speed change 1. Speed change lever ASSEMBLY · 1 003952 CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or drill bit 1 To change the speed, first switch off the tool and then slide the speed change lever to the lower side for high speed ("2" marking) or upper side for low speed ("1" marking). NOTE: · Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged. [. . . ]