User manual MAKITA NOTIC~42

[. . . ] Do not use cleaner close to dangerous flammable materials such as gasoline, gas, paint or adhesives. Do not pick up lit cigarettes and the like. When you suck up a large item and revolution becomes difficult, immediately switch off the cleaner and remove it. [. . . ] 1) • Always switch off the tool before insertion or removal of the battery cartridge. €¢ To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool. €¢ To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Be sure to close the set plate fully before using the tool. €¢ Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. 2) CAUTION: Before operation, always check to be sure that the filter and pre-filter are correctly installed, or dirt and foreign matter will get into the motor and cause a failure. To start the tool, simply pull the trigger. CAUTION: • Failure to re-assemble the filter and/or pre-filter so that they are back on all the way, or using a broken or ripped filter, can cause dust to get into the motor and result in a failure. €¢ Screw the capsule tightly into place. ) in the same direction as the capsule screws on. 3) Attach the nozzle to clean off tables, desks, furniture, etc. 4) The extension wand (straight pipe) fits in between the nozzle and the cleaner itself. This arrangement keeps the weight of the cleaner near your hand. [. . . ] 8) Empty the contents of the capsule and also the dust adhering to the pre-filter. Turn the pre-filter and pull it off toward you, emptying out the fine dust inside. Then take out the filter and tap out any adhering dust. [. . . ]