User manual MAKITA PS4600S

[. . . ] 1) CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. € Switch can be locked in “ON” position for ease of operator comfort during extended use. apply caution when locking tool in “ON” position and maintain firm grasp on tool. To start the tool, simply pull the switch trigger. [. . . ] To stop the tool from the locked position, pull the switch trigger fully, then release it. Ordinary eye or sun glasses are NOT safety glasses. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. Some material contains chemicals which may be toxic. Take caution to prevent working dust inhalation and skin contact. 2) For PS4600S only The tool speed can be infinitely adjusted between 4, 000 and 12, 000 orbit per minute by turning the adjusting dial. Refer to the figure for the relationship between the number settings on the adjusting dial and the kind of work. Then press the upper part of the front fixing cardboard in arrow direction to hook it onto the claws. 19) ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. OPERATION CAUTION: • Always use the front grip and firmly hold the tool by front grip and switch handle during operations. Run the tool at low speed to smooth out wax. NOTE: • First, wax a not conspicuous portion of the work surface to make sure that the tool will not scratch the surface or result in uneven waxing. Running it at high speed may cause the wax to spatter. 10) When the dust bag is about half full, switch off and unplug the tool. Run the tool at low speed to remove wax. Run the tool at low speed and apply the wool pad gently to the work surface. ENG102-3 MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. € Never use gasoline, benzine, thinner, alcohol or the like. discoloration , deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA): 81 dB (A) Sound power level (LWA): 92 dB (A) Uncertainty (K): 3 dB (A) Wear ear protection ENG211-2 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Work mode: sanding metal plate Vibration emission (ah): 3. [. . . ] Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA): 81 dB (A) Sound power level (LWA): 92 dB (A) Uncertainty (K): 3 dB (A) Wear ear protection ENG211-2 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Work mode: sanding metal plate Vibration emission (ah): 3. 5 m/s2 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. € The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. [. . . ]