Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA PS6000IH. We hope that this MAKITA PS6000IH user guide will be useful to you.
Lastmanuals help download the user guide MAKITA PS6000IH.
Detailed instructions for use are in the User's Guide.
[. . . ] 36 V AP-363/AP-3622 AT-3630/AT-3631 Loop handle 0 - 6 , 600 min-1 0 - 4 , 900 min-1 1 , 850 mm 300 mm 5. Be sure that you understand their meaning before use. The distance between the tool and bystanders must be at least 15 m. Wear a helmet, goggles and ear protection. [. . . ] In this case the two indicator lamps described in the table below do not light or blink. All other protection functions can be identified by the indicator lights described in the table below. 13)
Status Blinking Lighting On Battery power has been nearly used up. Battery protector is shutting off the power - battery power has been used up. Overload protector is shutting off the power - the motor was locked. overheat protector is shutting off the power - overheating. Electric or electronic malfunction
Action to be taken Replace the battery with fully charged one. Replace the battery with fully charged one. Release the switch trigger and remove the cause of the motor lock or overload. If the cutting tool is locked by entangling weeds or the like, always remove the battery cartridge before clearing it. Ask your local authorized service center for repairs. 21) NOTICE: • Do not push the wings outward too much. Fix the guard to the clamp with two bolts as shown. Tighten the right and left bolts evenly. 22) When using a nylon cutting head, mount the guard extension. Place the guard extension onto the mounting track provided on the lower edge of the guard. And slide it into position until the guard extension clicks and locks into place. The guard extension is designed so that it will only mount onto the guard in one direction. 23) NOTE: • Remove tape adhered to cutter, which cuts nylon cord, on guard extension at the first use. 24) To remove the guard extension, use a flat-blade screwdriver and place it into the small notch provided on the locking nub. To unlock the guard extension press down on the locking nub while sliding the lower guard extension in the direction indicated in the figure. Once the guard extension starts to slide it is unlocked and can be removed by continuing to slide it off of the guard. [. . . ] The drive system does not work correctly. Tighten the nut properly as described in this manual. Ask your local authorized service center for repair. Remove the battery and ask your local authorized service center for repair. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA PS6000IH
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA PS6000IH will begin.
