Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA SKR60. We hope that this MAKITA SKR60 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA SKR60.
Detailed instructions for use are in the User's Guide.
[. . . ] 4
Rotation Speed The head rotates at three speeds; 150 rpm is the default setting. To change rotation speed, press the 3rd key (speed/scan) on the keypad. The laser beam is more visible in slow motion. [. . . ] 1) Holding the laser in vertical position, attach laser to the tripod using the 5/8-11 mount on the wall mount. 2) Unlock the adjustable slope clamp(15). Tilt the laser 90° (the full extent you can move it) and lock. 3) Center the bubbles to level the laser (see p. 4) 4) Unlock the adjustable slope clamp. Tilt the laser until you reach the desired grade as shown on slope angle index (17) and lock. Changing the batteries When battery power is low, the laser will stop rotating and the laser beam will blink. 2) Replace batteries with 3 new AA alkaline batteries, matching polarity (– and +) as indicated in the compartment. 8
How to check the laser
Y axis X axis
Here are a few simple instructions to check your laser for calibration. Remember that the laser is a precision instrument and that it is important that you keep it calibrated and in proper condition. The accuracy of your work is completely your responsibility and you should regularly check your instrument, especially prior to important jobs. Horizontal checking (X and Y axis) The laser has 2 horizontal axes; both ends of each axis must be checked for calibration. 1) Place the laser on a flat surface 15m (50 feet) from a wall. To check the first axis, position it so that the Y leveling knob is facing the checking wall. 2) Center the bubbles in the horizontal vials by turning leveling knobs X and Y. The bubbles move in the direction you turn the knobs. Level one vial, then the other, then make fine adjustments to both. Stop the rotation so that the beam is a point. [. . . ] Rotation left / Move scan left Rotation right / Move scan right
Increase rotation speed or scan length
Rotation/Scanning Toggle Key
Decrease rotation speed or scan length
Battery
Care and Handling Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The Manual Laser is a precision instrument which must be handled with care. Always store and transport the laser and its accessories in the carrying case. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA SKR60
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA SKR60 will begin.
