Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA TD101F. We hope that this MAKITA TD101F user guide will be useful to you.
Lastmanuals help download the user guide MAKITA TD101F.
Detailed instructions for use are in the User's Guide.
[. . . ] If you use this tool unsafely or incorrectly, you can suffer serious personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring or its own cord. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. [. . . ] Hold the tool pointed straight at the screw. Before starting your job, always perform a test operation to determine the proper fastening time for your screw. The fastening torque is affected by a wide variety of factors including the following. After fastening, always check the torque with a torque wrench. Driver bit or socket bit Failure to use the correct size driver bit or socket bit will cause a reduction in the fastening torque. Bolt • Even though the torque coefficient and the class of bolt are the same, the proper fastening torque will differ according to the diameter of bolt. Even though the diameters of bolts are the same, the proper fastening torque will differ according to the torque coefficient, the class of bolt and the bolt length. The manner of holding the tool or the material of driving position to be fastened will affect the torque. Operating the tool at low speed will cause a reduction in the fastening torque. ASSEMBLY
CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. installing or removing driver bit or socket bit (Fig. 4)
Use only bits that has inserting portion shown in the figure. For other countries A=17 mm B=14 mm A=12 mm B=9 mm To install these types of bits, follow the procedure (1). To install these types of bits, follow the procedure (2). (Note) Bit-piece is necessary for installing the bit. To install the bit, pull the sleeve in the direction of the arrow and insert the bit into the sleeve as far as it will go. [. . . ] 5 m/s2 EC-DECLARATION OF CONFORMITY ENH101-9 Model; TD0101, TD0101F We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014, EN61000 in accordance with Council Directives, 2004/108/EC, 98/37/EC. 12)
The hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA TD101F
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA TD101F will begin.
