User manual MAKITA UB1100

[. . . ] Model UB1100 Capacities Air pressure (water column). Due to our continuing program of research and development, the specifications herein are subject to change without notice. ⷠNote: Specifications may differ from country to country. [. . . ] To stop the tool from the locked position, pull the trigger fully, then release it. Tool speed is increased by increasing pressure on the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. A speed control screw is provided so that maximum tool speed can be limited (variable). Turn the speed control screw clockwise for higher speed, and counterclockwise for lower speed. Always use protective goggles, a cap and mask when using the blower. Never point the nozzle at anyone in the vicinity when using the blower. Always use the dust bag when collecting dust, chips and the like. Do not collect still smoldering cigarette ashes, freshly cut metals shavings, screws, nails and the like. Warning ­ Electric shock could occur if used on wet surfaces. Increased motor revolution may cause dangerous fan breakage. The blower is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the blower. [. . . ] EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in compliance with the following standards or standardized documents, HD400, EN50144, EN55014, EN61000 in accordance with Council Directives, 73/23/EEC, 89/336/EEC and 98/37/EC. The typical A-weighted noise levels are sound pressure level: 86 dB (A) sound power level: 99 dB (A) ­ Wear ear protection. ­ The typical weighted root mean square acceleration value is not more than 2. [. . . ]