User manual MAKITA UM164D

[. . . ] Screws Grass shear blade cover Grass shear blade Trimming direction Tilt the blades Hedge surface to be trimmed String Clamping nuts Chip receiver Screws on the shear blades Blade cover to be always installed before installing the chip receiver 43. Model Effective cutting width Stroke per minute (min-1) Dimensions (L x W x H) Net weight Rated voltage UM164D 160 mm 1, 250 292 mm x 178 mm x 130 mm 1. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. ⷠSpecifications may differ from country to country. [. . . ] The cover supplied with the unit can be hung on the wall, providing a safe and practical way to store the hedge trimmer. Store the hedge trimmer with the cover on, in a dry room. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. It may result in a risk 11 If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. the battery cartridge can explode in a fire. Be careful not to drop or strike battery. Always switch off the tool before insertion or removal of the battery cartridge. ⷠTo remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. ⷠTo insert the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. ⷠDo not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. The lock-off button can be pressed from either right or left side. [. . . ] The hook hole in the tool bottom is convenient for hanging the tool from a nail or screw on the wall. Put the blade cover on the shear blades so that the blades are not exposed. Store the tool out of the reach of children carefully. store the tool in the place not exposed to water and rain. [. . . ]