Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA UT121. We hope that this MAKITA UT121 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA UT121.
Detailed instructions for use are in the User's Guide.
[. . . ] The user shall be responsible for damages caused by inappropriate use. Generally accepted accident prevention regulations and the safety instructions enclosed shall be observed. Power supply The machine shall only be connected to the voltage stated on the type plate and it only works with single-phase AC voltage. It is provided with double protective insulation according to European standards and thus, it may be also connected to sockets without ground cable. [. . . ] Do disconnect the power plug and check if the hand-held mixer is switched off when it is left unattended, e. During assembly and disassembly work, voltage drop, insertion and/or assembly of accessories. Do switch off the tool if it stops to operate due to whatever cause in order to avoid a sudden start of operation when it is unattended. Do always lead the cable away behind the tool. do not use the tool if a part of the housing and/or the switch , cable or plug is damaged. Power tools shall be inspected by an expert regularly. Do ensure that the handle bars are dry, clean and free from oil and grease. When the tool is operated manually, make sure that you always hold the tool with both hands and you stand in a firm position. Therefore, the following instructions shall always be observed: Use stirrers recommended by the manufacturer (maximum diameter: 120 mm with M14 thread). Do not overload the machine in a way that causes a standstill. Do always remove the power plug before carrying out any work on the tool. You may catch your fingers when inserting the tool. Therefore, do always wear protective gloves when changing tools. The work spindle of the tool is provided with a M14 internal thread. Do use a SW 22 spanner to remove the stirrer and to hold up the work spindle. Switching the machine on and off Short-Time Operation Starting the machine: Stopping the machine: Permanent Operation Starting the machine: Stopping the machine: Press on/off switch Release on/off switch Press on/off switch and while keeping it pressed, engage the lock button Press on/off switch again and release it Do only use the lock button if the tool is operated with the supporting stand. If a standstill caused by the tool or a power failure occurs, do immediately loosen the lock button by pressing the on/off switch in order to avoid the unintended restart of the tool (risk of injury). The mixer has an electronic switch in order to regulate the speed level by keystrokes. [. . . ] it is also suitable for a preliminary evaluation of the vibration emission level. The vibration emission level set out in these instructions presents the main applications of the power tool. If the power tool is used for other applications or with different tools or if maintenance is not sufficient, the vibration emission level may vary. This may lead to a significantly higher vibration emission level during the whole working period. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA UT121
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA UT121 will begin.
