User manual MAKITA UV380 PARTS LIST

[. . . ] If you drop or strike the cleaner, check it carefully for cracks or damage before operation. Do not bring close to stoves or other heat sources. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. It may result in a risk of overheating, possible burns and even an explosion. [. . . ] Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 C (122 F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. the battery cartridge can explode in a fire. Be careful not to drop or strike battery. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Always stop tool operation and charge the battery cartridge when you notice less tool power. Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. To insert the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. CAUTION: Always be sure that the tool is switched off before attempting to perform inspection or maintenance. Corner nozzle Fit on the corner nozzle for cleaning corners and crevices of a car or furniture. When storing the cleaner, hang it from a nail using the convenient hanger in back. Corner nozzle +Extension wand (Straight pipe) In tight quarters where the cleaner itself cannot squeeze in, or in high places hard to reach, use this arrangement. From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Clean out also the suction opening, dust bag/dust pack mounting area and the dust stopper. You can pick up powder and dust without nozzle. Wash the filter in soapy water when it is clogged with dust and the cleaner power becomes small. An insufficiently dried filter may cause poor suction and shorten the service life of the motor. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ] Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. [. . . ]