User manual MAMAS & PAPAS SAN REMO HIGHCHAIR

[. . . ] Read the instructions before constructing the product then follow them step by step. ImpoRtAnt!Keep foR fUtURe RefeRenCe Components Seat x1 Screws x4 Tray x1 Front legs x1 Back legs x1 Footrest x1 tools needed Cross-head screwdriver 2 San Remo Un-named V4. indd 2 6/8/10 15:25:27 AttACHInG tHe tRAy Position the seat unit flat on a level work surface with the back of the seat facing down. [. . . ] The highchair is now locked in the open position and ready for use. 7 San Remo Un-named V4. indd 7 6/8/10 15:25:27 opeRAtInG tHe HARness locking the harness: Push the tongues on the ends of the waist strap into the buckle. The harness will automatically lock when the tongues have been fully pushed in. Tongue Waist strap Adjusting the length of the harness: Slide the buckles on the waist strap and shoulder straps forwards or backwards until the desired length is reached. Unlocking the harness: Squeeze the tongues together on one end of the waist strap 1 and then slide them out of the buckle 2. Your child can now be removed from the highchair. 8 San Remo Un-named V4. indd 8 6/8/10 15:25:27 AdjUstInG tHe tRAy Locate the two tray adjustment handles located on the sides of the tray. Pull both of them out then slide the tray into the desired position. Release the adjustment handles to lock the tray into one of the four positions. RemovInG tHe fAbRIC CoveR Open the four press studs used to secure the fabric cover to the sides of the highchair. Use a cross-head screwdriver to remove the four screws and the four square washers. Slide the fabric cover from the backrest. 9 San Remo Un-named V4. indd 9 6/8/10 15:25:28 foldInG tHe HIGHCHAIR To disengage the frame lock, lift the tab on the bottom lock upwards. Lift the tray section upwards from the frame. 10 San Remo Un-named V4. indd 10 6/8/10 15:25:28 foldInG tHe HIGHCHAIR Lift the tray clear of the frame then pull the front and rear legs together. Lower the tray over the footrest. The legs and the footrest can be removed for compact storage. Depress the locking buttons used to secure the legs and footrest to the frame, then pull to separate the components. Store the components out of the reach of children. 11 San Remo Un-named V4. indd 11 6/8/10 15:25:28 Components · · · · WARnInG: do not leAve yoUR CHIld UnAttended. WARnInG: Always ensure the harness is correctly fitted and adjusted when the child is in the highchair. WARnInG: do not use the highchair unless all components are correctly fitted and adjusted. WARnInG: do not place your highchair in close proximity to an open fire or other sources of strong heat, such as radiators, electric or gas fires. [. . . ] Do not use replacement parts that are not recommended or supplied by Mamas & Papas. Non-approved parts may render the repair or highchair unsafe. · · · · · · · · · CleAnInG: · Clean your highchair and tray insert with a damp cloth or sponge and mild detergent. [. . . ]