User manual MAMAS & PAPAS SHERWOOD COT

[. . . ] If any items are damaged or missing, please contact your retailer or Mamas & Papas on 0870 8307700. Allow plenty of time and space when beginning the construction of your product. COMPONENTS 1 4 6 2 5 3 Item Name 1 2 3 Fixed side Support rail Foot end Part no. [. . . ] Slide the drop side towards the support rail to ensure that the guides are correctly engaged in the metal runners. STEP 7 Metal runner B Align the metal studs (D) on the cot ends align with the plastic runners in the drop side. With the help of another person carefully pull the leg of the cot end away from the drop side to allow enough space to insert the metal stud into the plastic runner. Insert each guide into the first groove in the plastic runner one side at a time. Fully tighten the two short bolts and four long bolts used to attach the support rail and the fixedside to the cot ends. STEP 8 Plastic runner D --7-7 Slot the unthreaded ends of the four base brackets (G) into one of the three base heights that you require. Ensure that all the base brackets are at the same height and the threaded ends are facing up. Note: The lowest base height position is the safest. You should use the cot in this position as soon as your baby is old enough to sit up. STEP 9 G 6 Attach the base (6) to the cot, with the information label facing up. Ensure that the threaded ends of the base brackets fit into the holes in the corners of the base. Screw the base bracket nuts (H) onto the threaded ends of the base brackets using the allen key. STEP 10 H --8-8 The cot is now fully assembled. Ensure that all the fittings are fully tightened before use. STEP 11 Lowering the drop side Stand in front of the drop side and grip the top rail with both hands. 2 Apply gentle pressure with your leg to the bottom of the drop side. 3 Lower the drop side. 1 3 STEP 12 2 --9-9 Raising the drop side Stand in front of the drop side and grip the top rail with both hands. Pull the drop side up until it locks in position. Apply firm downward pressure to the drop side to ensure it is locked in position. STEP 13 --10-10 INSTrUCTIONS FOr SAFE USE & MAINTENANCE · For reasons of safety we only recommend the use of the Mamas & Papas size 300 mattress for this cot. [. . . ] · Your cot may be cleaned with a damp cloth. Never use bleach or harsh abrasives. Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in these instructions. [. . . ]