User manual MAMIYA ZE

[. . . ] (Set at "AUTO" for normal operation. For other settings, presslock button and rotate dial. ) Shutter mode selector - Hot-stroe/eyepiece cover Hot-shoe (X-contact) Film advance lever Exposurecounter Shutter release button. with cable release socket Neck strap eyelet Self-timer lever Mirror (Delicate, don't touch!)- Film rewind knob with crank (Pullup to opencamera back) ASA film speedscale ASA film speed/exposure compensationdial Exposurecompensationscale Exposurecompensation dial lock "E" lens mounting index Automatic aperturecouplinglever Alignment index formounting White !u116n-APerture ring Depth-of-field scale "(lS" lensmoun (also tbr "P" mou index aduptt:r) Lens release button --Flash X-sync terminal with safety cover Distance e Focusing ing www. orphancameras. com Viewfinder eyepiece Back cover with film memo holder Film take-up spool Shutter curtains (Delicate, don't touch!) Film advancesprocket Mamiya Winder film advancecoupling Mamiya Winder positioning hole Rewind button Mamiya Winder electricalcontacts Film chamber Batterycartridge release Battery car-tlidge Tripod socket WhutYou See in theView:find, er When the shutter releasebutton is lightly pressed, LED lights inside the viewfinder an to indicate the correct shutter speed automatically selected by the camera in accordance with the aperture setting. [. . . ] The "LT" LED also lights to indicate when the shutter speedis set in the range below 1/30 sec. down to I sec. To shoot at the slow shutter speeds indicated by the 66LT"LED, it is recommended useeither to a tripod or the Mamiyalite ZE to prevent blurring. Flashing of any of the shutter-speed LEDs at the rate of 4 times per secondindicatesthat the batteriesshouldbe replaced. As long as the shutter releasebutton is pressed, the LED display continuesindicating the same shutter speed after the exposuie is completed for easy checking of whetheror not exposurewascorrect. Shutte Shutte display "LED" standsfor Light Emitting Diode. www. orphancameras. com Match the red dots on the lens and camerabody, then rotate the lens in the direction of the arrow until it clicks into position. If the white button (A) is set at 'mark, the central index the aperture ring cannot be turned. In this case, rotate the aperture ring away from the index mark while depressing white button. the Removing the lens Pressthe lens rele rotate the lens to stops. button and left until it Now Carefully and Surely Loada Roll of Film 1. Open the back cover of the camera by pulling up on the rewind knob. (Avoid direct sunlight when loading or unloading film. Stand in the shade or cast a shadowwith your own body. ) Load a film cartridgeinto the film chamberof the cameraand return the rewind knob to its original position to hold the film in place. 2. Insert the end of the film into the slot of the film take-upspool. 3. First advance operating the film then rotate the re the direction of the the slack out of th important to make both the upper and 1 the sprocket are e perforationsof the fil film by ance lever; d knob in row to take film. [. . . ] \4hile performing this operation, make sure that the film is properly by checkingif advancing the rewind knob rotateswhen the film advance leveris operated. ASA DIN 25 32 40 50 64 80 r00 200 ?50 320 500 0 . r600 20002500 15 16 17 18 19 20 21 22 23 24 25 zA 21 33 sa ss 36 [. . . ]