User manual MAPPY ITI 407 QUICK GUIDE

[. . . ] • If usage time is extremely short even when the battery has been fully charged, the battery may be near the end of its life. In this case, please contact MAPPY service center. • Battery replacement must be performed by a service person. Functions t w o q y w r u q Call button Press to make calls using a paired mobile phone device. e i w Status indicator LED Displays information on the headphones’ status. e Stereo mini jack (ø2. 5 mm) Connector for the included audio cable. r Noise cancelling function toggle switch Turns the noise cancelling function on and off. t Control wheel Operates a paired audio device (vpage  5 “Listening to music using Bluetooth”. Charge the headphone battery when first using it after purchase or when the battery level is low by connecting the headphones to a computer using the included USB cable. The LED indicator will flash when the battery is being charged. [. . . ] to be connected, and search the • Refer to the Bluetooth device’s owner’s manual for details. • If a PIN code (passkey) is requested, enter “0000” (four zeros). • The blue LED indicator will light up for approx. 5 seconds when pairing has been completed. 3 Preparation for Use Turning Bluetooth Wireless Connectivity On Adjusting the fit of the headphones Turn the Bluetooth function on in advance for the Bluetooth device which is to be connected. Press and hold the headphones’ Bluetooth button for approx. 1 second. • A beeping sound will be emitted and the red and blue LED indicators will light up simultaneously for approx. • The power switches on, and the Bluetooth function switches on. • Bluetooth is automatically connected if the headphones and Bluetooth device have already been paired (vpage  3 “Pairing with a Bluetooth device”). Adjust the slider length to fit your head when wearing the headphones. nnTurning Bluetooth Wireless Connectivity Off NOTE • Please read the attached “Precautions on the use of headphones” documentation. • Avoid getting your fingers or other body parts caught in the product’s moving portions. • Do not pull forcefully on the sliders. There are 2 ways of turning the Bluetooth wireless connectivity off: 1) connect the audio cable (included) to the audio input jack on the left ear cup. This automatically turns Bluetooth off and power switches to standby status. 3, 4 • Confirm that the headphones’ Bluetooth function is turned on. 3 • Confirm that the Bluetooth device to be connected is turned on and its Bluetooth function is activated. – • Confirm that the Bluetooth device to be connected is not in sleep mode. 5 • If the headphones and Bluetooth device are connected using the audio cable, disconnect the cable. The headphones’ Bluetooth function will turn off automatically when it is connected using the audio cable. 4 Sound cannot be heard • Confirm that the headphones’ Bluetooth function is turned on. 3, 4 through the headphones • Confirm that the Bluetooth device to be connected is turned on and its Bluetooth function is during Bluetooth activated. • Select the A2DP profile on the transmitting Bluetooth device. Refer to the Bluetooth device’s owner’s manual for details. – • Confirm that the connected Bluetooth device’s audio playback has been initiated. If necessary, increase the volume level on the connected Bluetooth audio device. [. . . ] • This product does not guarantee successful operation of this product together with all Bluetooth devices and mobile phones. • This product does not support connection with all Bluetooth devices and mobile phones. • This product’s wireless Bluetooth technology has a transmission range of approx. 10 meters, but interfering obstacles (people, metal objects, walls, etc. ), other radio signals, and other factors may affect the transmission range. [. . . ]