User manual MAPPY ULTI 505ND QUICKSTART GUIDE

[. . . ] 83 ANALYTICAL INDEX GPS Chart 160/170C Page 7 Congratulations on your purchase of the GPS CHART 160/ GPS CHART 170C!Whether this is your first chartplotter, or if you have other STANDARD HORIZON equipment, the STANDARD HORIZON organization is committed to ensuring you your enjoyment of this chartplotter. STANDARD HORIZON technical support personnel stand behind every product we sell, and our Product Support team invite you to contact us should you require technical advice or assistance, at 562-404 -2700 We appreciate your purchase of the GPS CHART 160/ GPS CHART 170C, and encourage you to read this manual throughly, to learn and understand the capabilities of the GPS CHART 160/ GPS CHART 170C fully. Electronic charts displayed by the chartplotter are believed to be accurate and reliable, but they are not intended to be a substitute for the official charts which should remain your main reference for all the matters related to the execution of a safe navigation. [. . . ] External devices are not receiving data from the chartplotter. The fix position is not received within 5 minutes from the power on despite the GPS Status page displays satellites. The connections or the Software settings may not be right. The GPS engine is not able to retrieve almanac. 1 GENERAL Power consumption (CP 160) : 380mA max @12V Power consumption (CP 170C): 800mA max @12V Power supply (CP 160) : 10 - 35 Volt dc, 5 Watt max Power supply (CP 170C) : 10 - 35 Volt dc, 10 Watt max Interface : Input/Output Interface NMEA-0183 Display (CP 160) : Mono transflective LCD (active area 5, 7") Display (CP 170C) : TFT Color LCD (active area 5, 7") sunviewable tecnology Display Resolution : 320 x 240 pixels Cartography : Operating temperature range : 0/+55 degrees Celsius Storage temperature : -20/+70 degrees Celsius Water Resistence : splash-proof Memory : Non volatile with battery backup Keyboard : Silicon rubber, backlight Weight : 900 gr. 1 Physical Constructions Physical Constructions : Polycarbonate radome, connector for easy mount, rubber-O-ring between top radome and base for waterproof. : Roof-mount with double threaded bolt or flag-pole mount with plastic adapter tubing that converts its base into 1'-14 threaded cap. 1 SYSTEM TEST If you have connected your chartplotter according to the instructions, and chosen the proper menu selection for your device, and are still having problems with your chartplotter, the extended auto-test should help determine the problem. Make sure the chartplotter is turned Off. While pressing and holding any other key, turn the chartplotter On. A new menu will appear on the display: Figure 7. pORT , Baud Rate = 4800 , Data Bits = 8 , Parity = none , Stop Bits = 1 , Polarity = +. Check your receiver manual to be sure that you have selected the proper parameter. If the screen is blank, you may have a broken connection, and no data is being received or you may have connected the device to the other input port. TERMS & FUNCTIONS This Section explains the terms that may be unfamiliar to the reader. The symbol indicates that the term is followed only by an explanation, while the symbol indicates that the term is more widely explained; you will also find a brief description on how to select the related menu option, listing the operation a keys sequence with the menu names enclosed between double apices. For example 'MENU' + "USER POINTS LIST" + 'ENTER' means that you must press the 'MENU' key, using the ShuttlePoint knob to select the USER POINTS LIST item and then press the 'ENTER' key to display the User Points List page. About (page) Selects a page that gives information on software and cartography version and general software specification (as User Points, Routes and so on). " + 'ENTER' Active Track Selects the number of the active Track. 'MENU' + "TRACK" + 'ENTER' + "ACTIVE TRACK" + 'ENTER' Additional Second Factor (ASF) Sets the ASF for the slave in the selected chain. 'MENU' + "ADVANCED SETUP" + 'ENTER' Alarms (menu) Turns Off or sets the desired value for the Arrival Alarm, XTE Alarm, Depth Alarm, Anchor Alarm e Audible Alarm. 'MENU' + "ADVANCED SETUP" + 'ENTER' + "ALARMS" + 'ENTER' Alter = Alternate Solution Turns On/Off the Alternate Solution in the chain. [. . . ] 'MENU' + "TRACK" + 'ENTER' + "TRACKING" + 'ENTER' Tracks & Routes Turns On/Off the displaying of Tracks and Routes (recommended and established Routes for ships at sea, including traffic separation schemes, deep water Routes, . TTG = Time To Go The estimated time needed to reach your destination, based on your current speed and the distance to destination. underwater Objects Turns On/Off the displaying of Underwater Objects. (Diffuser, Obstruction, Wreck, Cable - submarine, Cable area, Pipeline area, Pipeline - submarine/on land. [. . . ]