User manual MARANTZ AS4250

[. . . ] Ignoring this indication and improper handling could cause injury to a person or damage to the surrounding household belongings. WARNING CAUTION Examples of Symbols This symbol informs that there are contents that demand caution (including warnings). Concrete details of the caution are written within the diagram. This symbol indicates a prohibited matter. Concrete details of the prohibition are written within the diagram. [. . . ] For example, do not install the Plasma Display in narrow spaces where ventilation is poor, do not place covers over it, etc. - Do not install the Plasma Display near air conditioner air outlets or in places where vibrations are strong. Doing so could lead to fire or electric shock. - Do not install the Plasma Display in humid or dusty places or places exposed to soot or vapor (such as in kitchens, near humidifiers, etc. ). Do not install the Plasma Display outdoors. Doing so could lead to fire or electric shock. - When installing the Plasma Display, leave sufficient space around it, as shown in the diagram. Failure to do so could cause heat to build up inside, leading to fire. 50mm 50mm 50mm 50mm - Hold the Plasma Display securely when mounting the units on it. Failure to do so could cause the Plasma Display to fall, resulting in injury. - When installing the Plasma Display on a stand with casters, be sure to block the casters. If the stand should move, the Plasma Display could fall, resulting in injury. - The Plasma Display is heavy, so be sure to install in a stable place and take measures to prevent it from tipping over and causing injury. The Plasma Display has a high center of gravity. It should be unpacked and moved by a minimum of two people, holding it at the top and bottom. Failure to do so could cause the Plasma Display to fall, resulting in injury. NOTES Avoid dusty or humid rooms and rooms filled with soot or cigarette smoke. The Plasma Display's screen could get dirty, resulting in poor picture quality. Avoid places where the screen is exposed to direct sunlight or strong artificial light. If surrounding light should shine on the screen, the screen will appear white and be hard to see. Do not install in places where the temperature is high or low. Additional fall prevention measures - Either use the tip prevention fitting included with the display to fix the plasma display to a wall, pillar or other strong place or use the holes on the back on the stand to fix to a table, etc. . (Do no use with the separately sold ceiling mount unit or wall mount unit. ) - Pay attention to the rope when moving the Plasma Display. [. . . ] Fasten the bar to the feet using the four included stand assembly screws (M4). Bar installation position for 42" * For 42-inch plasma displays, the 2 cores, 4 * When installing in the vertical position core mounting screws and 2 display mounting screws are not used. CAUTION: Tighten the screws immediately after placing the display on the stand. If not, the display could tip over, resulting in injury. Installing the Plasma Display on the Stand Mounting a 50-inch plasma display on the stand 1. Turn the bar upside down and place it on the feet, lining it up with the screw holes in the feet. 3. Insert the plasma display on the stand and fasten it. Use four of the included M6 display mounting screws to fasten the monitor to the stand. Install with the arrow facing the front. 2. [. . . ]