User manual MARANTZ AS6150 INSTALL GUIDE

[. . . ] Ignoring this indication and improper handling could be the cause of personal injury such as a serious injury or death. Ignoring this indication and improper handling could cause injury to a person or damage to the surrounding household belongings. WARNING CAUTION Examples of Symbols This symbol informs that there are contents that demand caution (including warnings). Concrete details of the caution are written within the diagram. This symbol indicates a prohibited matter. [. . . ] Moreover, Do not install into a vehicle. 2 Always Heed the Following CAUTIONS - Do not obstruct the Plasma Display's ventilation holes. If the ventilation holes are covered, the heat will build up inside, and this could lead to fire. For example, do not install the Plasma Display in narrow spaces where ventilation is poor, do not place covers over it, etc. - Do not install the Plasma Display near air conditioner air outlets or in places where vibrations are strong. Doing so could lead to fire or electric shock. - Do not install the Plasma Display in humid or dusty places or places exposed to soot or vapor (such as in kitchens, near humidifiers, etc. ). Do not install the Plasma Display outdoors. Doing so could lead to fire or electric shock. - When installing the Plasma Display, leave sufficient space around it, as shown in the diagram. Failure to do so could cause heat to build up inside, leading to fire. 50mm/1. 97inch 50mm/1. 97inch 50mm/ 1. 97inch 50mm/ 1. 97inch 50mm wall - Hold the Plasma Display securely when mounting the units on it. Failure to do so could cause the Plasma Display to fall, resulting in injury. - When installing the Plasma Display on a stand with casters, be sure to block the casters. If the stand should move, the Plasma Display could fall, resulting in injury. - The Plasma Display is heavy, so be sure to install in a stable place and take measures to prevent it from tipping over and causing injury. The Plasma Display has a high center of gravity. It should be unpacked and moved by a minimum of two people, holding it at the top and bottom. Failure to do so could cause the Plasma Display to fall, resulting in injury. NOTES Avoid dusty or humid rooms and rooms filled with soot or cigarette smoke. The Plasma Display's screen could get dirty, resulting in poor picture quality. Avoid places where the screen is exposed to direct sunlight or strong artificial light. If surrounding light should shine on the screen, the screen will appear white and be hard to see. Do not install in places where the temperature is high or low. Additional fall prevention measures - Either use the tip prevention fitting included with the display to fix the plasma display to a wall, pillar or other strong place or use the holes on the back on the stand to fix to a table, etc. . (Do no use with the separately sold ceiling mount unit or wall mount unit. ) - Pay attention to the rope when moving the Plasma Display. [. . . ] On the bar side, after pulling out the slit section, bend as shown in the diagram then fold down. 9. Fold down the front and rear of the box and remove the stand. Remove the cover from the foot. 7 Mounting the plasma display on the stand 1. Insert the plasma display into the stand. Check that the stand and plasma display are facing the proper direction, then insert the plasma display into the stand. [. . . ]