User manual MARANTZ CC4001P

[. . . ] Model CC4001 User Guide CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT ENGLISH WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz. IMPORTANT When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. [. . . ] If this is the case, place it further away from the tuner or TV set. · Compact discs have much less noise than analog records and hardly any noise is heard before play starts. Bear in mind, therefore, that if the volume control on the amplifier is set too high, you will risk damaging other audio components. · Do not use commercially available lens cleaners, as they may damage the lens. PHON ES w Insert the batteries with correct ª /· orientation. Two AA-size batteries Remote control unit (RC4001CC) e Close the battery cover until it clicks shut. 4 NAMES AND FUNCTIONS FRONT PANEL /3 5 DISC CD CHANGER CC4001 1 MP3 CD PROGRAM R TRACK DISC TOTAL EACH REMAIN MIN SEC 12345 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 /4 v b /0 OPEN/CLOSE PLAY . STOP , PAUSE m 1 2 3 4 5 DISC SKIP 2 3 4 5 RANDOM REPEAT 1DISC REPEAT RANDOM LEVEL STANDBY POWER ON/STANDBY PHONES x z c /2 /1 n /5 /6 z POWER ON/STANDBY button When it is pressed, the display window lights up, and the power comes on. When it is pressed again, the display window is extinguished, and goes into the standby status. n 4/1, ¡/¢ (Track Skip/Search buttons) These buttons can be used as both track skip and track search buttons. (on the main unit only. ) ¡/¢ : Each time this button is pressed, the track being played is skipped forward. When this button is continuously held down, tracks are searched forward (Fast Forward). 4/1 : When this button is pressed, the unit goes back to the beginning of the current track. If the button is pressed more times, the track being played is skipped back. When this button is continuously held down, tracks are searched backward (Fast Rewind). In program play, Fast Forward and Fast Rewind can be done in the playing track only. , 7 STOP button Press this button to stop playback. Also this button is used to clear programs. /3 1-5 (Disc Select button) Choose a disc to play. . 3 PLAY button Press this button to start playback. /4 DISC SKIP button When this button is pressed while multiple discs are placed on the tray, a disc to play can be chosen with rotating the tray clockwise. When this button is pressed while the tray is open, the turn table in the tray rotates so that the disc can be replaced. x STANDBY indicator Lights up in red color while standby status. /0 0 OPEN/CLOSE button Press this button to open the tray. Press the button again to close the tray. c Disc tray The disc to be played is placed on the tray. /5 PHONES (headphones) jack The headphones are connected to this jack. Caution Close the tray by pressing the operation button, not by pressing it in with your hand. Caution Do not press the disc tray in by hand. This may cause malfunction. Caution Use headphones with a standard plug. v Remote sensor The infrared control signal emitted from the remote control unit is sensed here. /1 RANDOM button Playback tracks randomly. (See page 14) b Display window This screen shows the operating status. /2 REPEAT button Playback a track or disc repeatedly. Use this button also to switch to the Repeat mode (One Track Repeat, One Disc Repeat, and All Disc Repeat). (See page 15) /6 LEVEL (headphone volume) control This control is used to adjust the headphone volume. Turn it clockwise to increase the headphone volume. m 8 PAUSE button Press this button to pause playback. If pressed again, the unit returns to playback. 5 ENGLISH NAMES AND FUNCTIONS ENGLISH DISPLAY WINDOW a bcde 1 2 R TRACK DISC TOTAL EACH REMAIN MIN SEC 1 6 11 16 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 MP3 CD PROGRAM f g h RANDOM REPEAT 1DISC n m 3 4 5 l a 3 (Play) indicator This lights during disc play. k j i l Remote Control indicator This lights during a remote control unit is operated. h REMAIN indicator This lights while displaying track and disc remaining times. b 8 (Pause) indicator This lights when play is paused. i 1-20 (track number display) Displays the number of tracks recorded in a disc, the number of remaining tracks, and the number of tracks programmed with program play. [. . . ] * This condition may occur in Mixed-Mode CDs, CD Extra, and other discs that have CDDA format mixed with other data. Noise may also be heard momentarily when skipping tracks. # A specific CD cannot be played. Copy control CDs (CDs with copy guard) are special discs that do not comply with current CD standards. Marantz cannot guarantee the ability to play such discs on your CD player. When normal CDs can be played without a problem and problems occur only when playing these special discs, it is not a problem with this unit. [. . . ]