User manual MARANTZ DN-A7100

[. . . ] AV SURROUND PREAMPLIFIER DN-A7100 USER GUIDE BEDIENUNGSANLEITUNG MODE D'EMPLOI GUIDA DELL'UTENTE GUÍA DEL USUARIO GEBRUIKSAANWIJZING GUIA DO UTILIZADOR BRUKSANVISNING ENGLISH WARRANTY For warranty information, contact your local DENON distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with DENON. IMPORTANT When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. [. . . ] 3. To select each speaker , press the 3 or 4 cursor buttons. To set the distance for each speaker , press the 1 or 2 cursor buttons. After you complete this portion of the set up, move the cursor to "NEXT" with the 3 or 4 cursor buttons and then press the ENTER button to go to the next page. 2-3. SPEAKERS LEVEL SETTING WITH TEST TONE Here you will set the volume for each speaker so that they are all heard by the listener at the same level. We recommend using a SPL (Sound Pressure Level) meter, when available. Note: The speaker level settings are not available in 7. 1 Channel Input mode, CS mode and Multi Channel Stereo mode. 2-3 SPEAKERS TEST MODE FRONT L CENTER FRONT R SURR. R SURR. B R SURR. B L SURR. L SUB W MAIN RETURN LEVEL : MANUAL : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB EXIT 3. 4. FRONT L: Set the distance from the front left speaker to your normal listening position. CENTER: Set the distance from the center speaker to your normal listening position. After you complete this portion of the set up, press the ENTER button, the cursor will move to "MAIN" and then press the ENTER button to go to SETUP MAIN MENU. Notes: · Speakers that you selected "NONE" for in the Speaker Size menu will not appear. · The setting of Surr. Back L and Surr. Back R appears if you have set it for two surround back speakers in the Speaker Size menu. · The setting of Surr. Back appears if you have set it for one surround back speaker in the Speaker Size menu. · To adjust the speaker levels for 7. 1-channel input sources, you will need to use the 7. 1CH-INPUT sub menu. (See page 23). TEST MODE : Selects "MANUAL" or "AUTO" for generating the mode of the test tone with the 1 or 2 cursor buttons. 21 ENGLISH SURR. BACK SIZE LARGE: Select if the surround back speaker is large. SMALL: Select if the surround back speaker is small. 2-2 SPEAKERS DISTANCE FRONT R: Set the distance from the front right speaker to your normal listening position. L: Set the distance from the surround left speaker to your normal listening position. R: Set the distance from the surround right speaker to your normal listening position. SUB W: Set the distance from the subwoofer to your normal listening position. B L: Set the distance from the surround back left speaker to your normal listening position. B R: Set the distance from the surround back right speaker to your normal listening position. If you select "AUTO" , the test tone will be cycled through in a circular pattern which is Left Center Right Surround Right Surround Back Right Surround Back Left Surround Left Subwoofer Left . . increments of 2 seconds for each channel. Using the 1 or 2 cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all the speakers. 3 PREFERENCE 3 PREFERENCE STANDBY MODE TV-AUTO OSD INFO BILINGUAL VIDEO CONVERT HDMI DC TRIGGER MAIN : ECONOMY : : ENABLE : MAIN : ENABLE VIDEO CONVERT: Select the VIDEO CONVERT function to enable or disable with the 1 or 2 cursor buttons. [. . . ] To turn on the DN-A7100, press and hold the CLEAR and KEY-LOCK buttons simultaneously for 3 seconds or more. Remember that the procedure will reset the settings of the SOURCE, Surround mode, delay time, TUNER PRESET etc. , to their initial settings. VIDEO Television Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTSC/PAL Input Level/Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 ohms Output Level/Impedance. . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]