User manual MARANTZ IS301E

[. . . ] 16 2:38:52 PM CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] IN A CASE WHERE THE IPOD AND HANDSET ARE USED DETACHED FROM THE BASE UNIT Depending on the type of iPod, the handset may not enter Wireless mode when the iPod is started. In such a case, detach the iPod from the handset with the iPod’s power on then reconnect it to the handset. TROUBLESHOOTING ADVANCED OPERATIONS M EN BASIC OPERATIONS NAMES AND FUNCTIONS BASIC OPERATIONS N N E M U ENGLISH BASIC OPERATIONS NAMES AND FUNCTIONS BASIC BASIC OPERATIONS OPERATIONS ADVANCED OPERATIONS TROUBLESHOOTING OTHERS IS-LINK (WIRED) CONNECTIONS WHAT ARE AVAILABLE WHEN IS-LINK CONNECTIONS ARE USED • • • • Audio and video playback Remote operations of a Marantz amplifier or receiver, using the AMP control buttons on the handset Remote control of a Marantz amplifier, using the supplied remote controller Use of the base unit as an infrared signal receiver for controlling a Marantz product ME NU B S U Handset BEFORE CONNECTION Notes • What are NOT available when IS-LINK connections are made are as follows: • Video playback of an iPod when the iPod and the handset are detached from the base unit • During IS-LINK connection, power is supplied to the base unit from the extender. Therefore, it is not necessary to connect the AC adaptor to the base unit. € Three types of video signals are output from the extender. Set the Video selection switch of the base unit according to the video output signal to be used. € If the Video selection switch is switched during video playback, the output signal may not be switched, depending on the type of iPods being connected. In such a case, go back to the MENU screen then restart video playback. Connect the AUDIO OUT terminals of the extender with the line input terminals of an amplifier/ receiver, via the supplied AV cable. Connect the video input terminal of an amplifier/receiver/TV to one of the VIDEO OUT terminals (VIDEO/S-VIDEO/COMPONENT) of the extender, using an appropriate video cable. The S-VIDEO and component video cables are not supplied with this unit. Connect the base unit and extender with two supplied IS-LINK cables. Note NEVER connect different video cables simultaneously, as this may result in disturbed video signals or a failure. Extender If you wish to remotely control the connected equipment using the Marantz REMOTE CONTROL terminals, connect the REMOTE CONTROL terminals of the connected equipment and the extender with the supplied remote cable. nT NE O MPO VIDE CO SVIDE O Base unit IS-LINK cables 2. Connect the supplied AC adaptor to the AC adaptor terminal of the extender. (For details on preparation of the AC adaptor, see page 6. ) e CONNECTING THE HANDSET TO THE BASE UNIT For details on connection , see page 8. € During IS-LINK connection, power is supplied to the base unit from the extender. Therefore, it is not necessary to connect the AC adaptor to the base unit. 16 2:35:28 PM OTHERS TROUBLESHOOTING ADVANCED OPERATIONS BASIC OPERATIONS NAMES AND FUNCTIONS BASIC OPERATIONS ENGLISH ADVANCED OPERATIONS CONNECTING THE EXTENDER WITH OTHER BLUETOOTH DEVICES The extender can be connected with other Bluetooth devices with the A2DP profile. nAMES AND FUNCTIONS BASIC OPERATIONS ADVANCED ADVANCED OPERATIONS OPERATIONS TROUBLESHOOTING OTHERS 1. [. . . ] After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation. In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment’s behavior. The iPod is not properly connected Disconnect the iPod from the docking with the iPod docking connector of connector then connect it again. [. . . ]