User manual MARANTZ PMD430 SERVICE MANUAL

[. . . ] There are, however, some installation and operation precautions which you should be particularly aware of. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. [. . . ] REMOTE EXT (extension) jacks Connection with other Marantz Professional components equipped with REMOTE EXT. jacks will allow for extended cascade operation of several units. RS-232C connector Using serial communication, a host device can control this unit. · The RS-232C host can control all functions of the PMD430 externally · The PMD430 automatically transmits status data when status is changed. · The PMD430 will respond to a status request by transmitting the associated status data I FADER START jacks Upon receiving a dry switch contact closure on the jack connections, the CD Player can be switched in and out of play and play/pause mode. The Tape deck can be switched in and out of play and stop or the record and stop mode. POWER CORD 120VAC input power connector. J B Operations The following operating procedures are based on the assumption that the power switch is set to the ON position and that all input and output connections have already been made. For examples of input and output connections, please refer to the section in this manual marked "Connections". C D CASSETTE DECK OPERATION TAPE PLAYBACK 1. Open the cassette holder by pressing the eject button. Load a cassette tape into the cassette holder and close. The indicator on the play control button will begin to flash. The REC indicator will begin to flash indicating the tape transport is in the record pause mode. If the ALC control is in the Off position, use the MANUAL RECORD LEVEL control to adjust the input signal to the desired recording level. Press the FORWARD PLAY button to begin recording in the forward direction. Press the CD PLAYER OPERATION CD PLAYBACK 1. Open the compact disc tray by pressing the STOP/ EJECT button . Load a compact disc onto the compact disc tray and close the tray by gently pushing the front of the compact disc tray or by pressing the STOP/EJECT button . The CD player display will show the general data of the current CD. To begin playback of the compact disc, press the PLAY/PAUSE button . The indicator in the PLAY/PAUSE button will illuminate. The display will show the data for the first track and the track will begin to play. To pause the CD during playback, press the PLAY/ PAUSE button . [. . . ] Higher levels of performance can be expected under most conditions. *Subject to change without notice. - 24 - ENGLISH CONNECTIONS MIC IN IN R L L TAPE OUT CD OUT TAPE+CD OUT L MPX FILTER ON OFF CD DIGITAL OUT RC-5 IN REMOTE EXT IN RS232C FADER START CD TAPE R R OUT OUT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGER INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM or RC-5 AMPLIFIER DCC IN OUT IN TAPE OUT AUX TUNER CD PHONO L GND R CD-R (DCC/DAT) DIGITAL COAXIAL OPTICAL IN OUT IN OUT The RC-5 connections shown enable Marantz Professional cascade operation. CAUTION The TAPE + CD OUT should be connected to TAPE IN of the amplifier. If this output is connected to another input and the amplifier's input selector is set to this input, oscillation may occur when the PMD430 is set to record which could damage the speakers. - 25 - ENGLISH PMD430 LIMITED WARRANTY Your Marantz Professional product is warranted against manufacturer defects in material and workmanship for a period of one year parts and labor. [. . . ]