User manual MARANTZ PMD580

[. . . ] Model PMD580 User Guide Network Solid State Recorder IMPORTANT TO SAFETY WARNING: To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus LABELS (for U. S. A. model only) CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFOR-MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] Turn the Jog wheel to toggle among Stop, Next and Recue. When correct, press the Jog wheel. The display returns to Single Mode. 6. If you are done making Menu changes to the Preset, press the MENU/STORE/UTILITY button to save your changes. Display returns to stop mode. 30 (C01) Remote The Remote Menu setting is for a wired remote (not supplied) plugged into the REMOTE Phone jack. There are three remote modes. Selection Range Start Pause Start Pause TR Manual Track Default Note (S01) Date The date is written on each audio track (file) when the track is started. When an audio track is viewed on a computer, this date appears as when the file was "Created". Start Pause: During recording or playback, close to start, open to pause. Start Pause TR: During recording, close to start, open to pause. After a record pause, start begins the next track. Manual Track: During recording, close to increment the track. A new track is created at that point. Items Year Month Day Selection Range 2007 2099 Jan Dec 01 31 1. From stop, press the MENU/STORE/UTILITY button. Turn the Jog wheel until Date appears in the display. Press the Jog wheel while Date is displayed. The Date information will be displayed with the year flashing. 1. From stop, press the MENU/STORE/UTILITY button. Turn the Jog wheel so Remote is displayed. While Remote is displayed, press the Jog wheel. The Start Pause, Start Pause TR or Manual Track will be flashing. Turn the Jog wheel to toggle among Start Pause, Start Pause TR and Manual Track. When correct, press the Jog wheel. The display returns to Remote. 4. Turn the Jog wheel until the current year is displayed. Press the Jog wheel to confirm the year. The month will be flashing. 6. Turn the Jog wheel until the current month is displayed. Press the Jog wheel to confirm the month. The day will be flashing. 6. [. . . ] d) Any shipment (claims must be presented to the carrier). e) Any cause other than a defect of manufacturing. Cleaning, check-ups with no fault found or changes incurred for installation, removal or reinstallation of the product. Any serialized product on which the serial number has been defaced, modified or removed. [. . . ]