User manual MARANTZ RC 5500SR

[. . . ] 5J/PPC CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] After you complete this portion of the set up, move the cursor to MAIN with the or cursor buttons and press the ENTER button. Notes: • The TUNER, AUX1 and AUX2 are fixed to the analog input, and cannot be selected for any digital input. €¢ When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input. €¢ If “Dx-AT” is selected and a DVD, compact disc or LD is fast-forwarded during playback, decoded signals may produce a skipping sound. in such cases , change the setting to DIGITAL. Select “SPEAKER SETUP” in SETUP MAIN MENU with or cursor button, and press the ENTER button. To select the each speaker, press the or cursor buttons. To select the setting of each speaker size, press the or cursor buttons. After you complete this portion of the set up, move the cursor to “NEXT” with the or cursor buttons and then press the ENTER button to go to the next page. sUBWOOFER: YES: Select when a subwoofer is connected. NONE: Select when a subwoofer is not connected. 5J/PPC Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to create the proper sound space that the SR5500 and today’s sound systems are able to produce. 3 PREFERENCE 3 P R E F E R E NC E S T ANDB Y MOD E T V - AU T O OSD I N FO V I D EO CON V E R T : : : : E CONOMY ✽✽✽ E NAB L E E NAB L E Note: • For speakers that you have selected “NONE” the Speaker Configuration sub-menu will not appear here. (There are several useful books and special DVD and LD’s available to guide you through proper home theater configuration. If you are unsure, have your Marantz dealer perform the installation for you. They are trained professionals familiar with even the most sophisticated custom installations. ORG website for further information about this). 0 EX m m m m m m m m IT If you select “AUTO” , the test tone will be cycled through in a circular pattern which is Left →Center → Right → Surround Right → Surround Back Right → Surround Back Left → Surround Left → Subwoofer → Left →. [. . . ] The center speaker cable connection is Connect the cable correctly. STEREO has been selected for Surround When STEREO is selected for Surround mode, no mode. Sound will be output from the center speaker. Center = NONE has been selected in Make the correct setting. [. . . ]