User manual MARANTZ SA-KI PEARL

[. . . ] Model SA-KI-PEARL User Guide Super Audio CD player CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] (See page 15) This coaxial digital output connector performs digital output of the music CD of the audio CD during playback. (See page 14) y DIGITAL AUDIO IN OPTICAL (optical digital input) terminal OTHERS This optical input terminal is for digital input when using the unit as a D/A converter. (See page 15) e REMOTE CONTROL IN / OUT (remote control IN and OUT) connectors These connectors are used to connect the player to a Marantz audio component equipped with remote control connectors using the supplied remote control connecting cable. (See page 15) u ANALOG OUT (analog output) connector This connector outputs the music signal during playback. (See page 11) 9 TROUBLESHOOTING t DIGITAL AUDIO OUT COAXIAL (coaxial digital output) connector APPLICATION OPERATION ADVANCED CONNECTIONS BASIC CONNECTIONS NAMES AND FUNCTIONS NAMES AND FUNCTIONS ENGLISH NAMES AND FUNCTIONS NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS APPLICATION OPERATION TROUBLESHOOTING OTHERS DISPLAY a sd f g hj k l ¡0 ¡1 ¡2 ¡3 FIL 1 2 1 RPT RNDM PROG AMS TRK CD M FILE D OFF REMAIN TTL ¡6 ¡5 a FIL 1 2 (filter 1, filter 2) indicator This indicates whether filter 1 or filter 2 is currently selected. ¡4 l CD indicator This indicator indicates the type of disc on the disc tray (CD). s 1 (repeat) indicator This indicator lights up during repeat play of one track. ¡0 M FILE indicator This indicator indicates the type of disc on the disc tray (WMA/MP3). d RPT (repeat) indicator This indicator lights up during repeat play. ¡1 D OFF (digital output OFF) indicator This indicator lights up when the digital output setting of the audio CD signal is set to OFF. (See page 21) f PROG (program) indicator This indicator lights up during program play. ¡2 REMAIN (remaining time) indicator This indicator lights up above the remaining playback time of a track, when it is displayed. g RNDM (random) indicator This indicator lights up during random play. h TRK (track) indicator This indicator lights up above the display of the track number currently being played. ¡3 TTL (total time) indicator This indicator lights up above the total remaining time or the total program time, when it is displayed. j AMS (automatic music scan) indicator This lights up during AMS playback. ¡4 Main display area This area displays the time display and text information of the disc to be played, as well as the setting menu items, etc. k SUPER AUDIO CD indicator This indicator indicates the type of disc on the disc tray (Super Audio CD). ¡5 8 (pause) indicator This indicator lights up when play is paused. ¡6 3 (play) indicator This indicator lights up during disc play. 10 ENGLISH This CD player is connected to an amplifier, CD recorder and other components for use. To ensure that the components are connected properly, refer to the instruction manuals that come with the components to be connected. Before connecting the components, be absolutely sure to turn off their power. CONNECTING THE POWER SUPPLY 1. Plug the power cable into AC IN jack on the back panel. CONNECTING TO AN AMPLIFIER Use the audio connecting cord to connect the player with a stereo amplifier or AV amplifier. When making the connections, insert the plugs securely into the connectors. Failure to insert the plugs securely may result in noise. MODEL NO. SA-KI-PEARL EXTERNAL INTERNAL IN OPTICAL COA 2. 3. (Red) (White) Plug the power cable into an AC outlet. Turn on the power switch of the audio unit (amplifier, etc. ) that is connected with this unit. Set the selector on the connected unit to this unit. (Red) (White) : Signal flow 3 2 1 2 3 1 Amplifier Caution: Do not connect the player to the PHONO input connectors on the amplifier. 11 OTHERS TROUBLESHOOTING APPLICATION OPERATION Audio connecting cord (supplied) ADVANCED CONNECTIONS BASIC OPERATION BASIC CONNECTIONS NAMES AND FUNCTIONS BASIC CONNECTIONS ENGLISH BASIC OPERATION NORMAL PLAYBACK 4. Press 2 button. Disc type is automatically detected and playback is started. Track number and track elapsed time (minute, second) appear on the display. · For Super Audio CD/CD hybrid-layer discs (see page 4), the layer that is set in the start sound mode (see page 20) is played. To change the layer, use the SOUND MODE button (see page 20). (Exp. :Track 6, Elapsed time 2 min 8 sec) Number of current track Minutes Seconds NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS APPLICATION OPERATION TROUBLESHOOTING OTHERS 7 Super Audio CD player playback OPEN/ CLOSE PLAY STOP PAUSE 2. 3. 1. 4. 1. Press POWER switch to turn on. Display Playback automatically stops at the end of the final track. ¶ To stop playback Press 7 button. The display cycles from "Power On" "TOC Reading" "No Disc" (when no disc is loaded). 2. Press the 0 button. [. . . ] For details, please read the instruction manual provided with a CD recorder. * TOC stands for Table Of Contents and contains information such as the total number of tracks and total playing time of the disc. · This unit can play CD format, and CD-R/CD-RW discs which contain WMA/MP3 music data. However, some discs may have problems such as unable to play, noise or sound distortion. [. . . ]