User manual MARANTZ SA-KI PEARL LITE

[. . . ] SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Super Audio CD player SA-KI-PEARL-LITE ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Read these instructions. Install in accordance with the manufacturer's instructions. [. . . ] ·This setting is stored in the memory and is not cleared even when the disc holder is opened or closed or the power is turned off. To change the setting, repeat the procedure above. Basic connections Power indicator Disc tray n n n n n Playback of MP3 and WMA files (vpage 14) Playback iPod® (vpage 16) Playing a USB memory device (vpage 17) Using as a D/A converter (vpage 18) Performing menu settings (vpage 19) Basic operation Before use Switching the sound mode (Playback layer) <ON/STANDBY> <DISC/INPUT> Some super audio CD discs have 2 layers. Before playback, perform the operation below to select the playback layer. For details on the super audio CD, see "Super audio CD" (vpage 23). Advanced connections If a layer in which nothing is recorded is selected, the other layer that exists on the disc is played back automatically. NOTE Sound mode cannot be changed for discs with only a Super Audio CD area. Advanced operations Turning the power off [S. MODE] [POWER] [DISC] The sound mode can also be set using "SA-CD (Switching sound mode)" (vpage 20) in the setting menu. Press <ON/STANDBY> or [POWER]. Power is set to standby and the power indicator lights. 1 2 Check that no disc is loaded. Turn the power on. (Press <ON/STANDBY>. ) ·If the layer is switched while a disc is in the player or the disc tray is opened, the playback layer switches for that disc, but the top priority playback layer setting itself does not change. Explanation of terms Before setting power to standby, make sure the disc tray is completely closed. NOTE ·Do not force the tray in by hand while power is set to standby. ·Even when power is set to standby, electrical current passes through some circuits. If you do not intend to use the unit for an extended period of time, unplug the power cord from the household power outlet. Troubleshooting / 3 Press <DISC toINPUT> or [DISC] to set the playback media mode "DISC". Press [S. MODE] 4 set (Super Audioand switch to the layer you want to CD only). SA-CD CD Specifications Index [Selectable items] SA-CD CD : Plays back the 2-channel area of the Super Audio CD (the default setting). : Plays back the CD layer of the Super Audio CD. 8 ENGLISH Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control Button only on the main unit Button only on the remote control DISPLAY OFF indicator DISC tray Switching the input source This unit supports the following playback functions in addition to disc playback. ·Digital audio input signal playback ·USB memory device file playback from the USB port in the front panel ·iPod file playback from the USB port in the front panel ·Computer file playback from the USB port in the rear panel Before playing back files from a connected device, perform the following operation to switch the input source. Playback CDs Playing Super Audio CDs or CDs Press 1 source<DISC/INPUT> or [DISC] to change the input to "Disc". 2 Insert a disc. BUTTON <BUTTON> [BUTTON] <7 / 9> 5 2 1 ·Press 5 to open and close the disc tray. ·When you press 1 and close the Disc tray, "Toc Reading" is displayed in the Display and then playback will start. Press <DISC/INPUT> or [INPUT] to select the input source. USB PC Coaxial back super audio CD, 3 When playingselect thea layer that you want topress play [S. MODE], and back. SA-CD CD <8 / 6> <DISC/INPUT> 3 <LEVEL> Disc <DISC/INPUT> only Optical [Selectable items] [INPUT] [DISC] [RANDOM] [REPEAT] USB PC : Plays back files on the device connected to the USB port (iPod/USB) on the front panel. (vpage 16, 17) : Connect a computer to the USB port (DIGITAL IN) on the rear panel, and use this unit as a D/A converter. (vpage 19) : Connect a digital device to the COAXIAL port (DIGITAL IN) on the rear panel, and use this unit as a D/A converter. (vpage 19) : Connect a digital device to the OPTICAL port (DIGITAL IN) on the rear panel, and use this unit as a D/A converter. (vpage 19) : Plays back the disc inside the disc tray. (vpage 9) 4 Press 1. Press 2. The "1" display lights, and playback begins. ·When all of the tracks recorded on the disc have finished playing back, playback stops automatically. [S. MODE] [DISPLAY] [TIME] Stopping Playback Stopping Playback temporarily Press 3. ·The "3" indicator lights. ·To restart playback, press 1 or 3. Coaxial Optical 3 1 [NUMBER] (0 ­ 9) [8, 9] 2 [6, 7] Disc Fast-Forwarding and Fast-Reversing (Searching) GUsing the buttons on the main unitH The search is started by holding down <8/6>, <7/9> during playback. The search speed can be changed by holding down <8/6>, You can press [DISC] to switch the input source to "Disc". <7/9>. The search speed changes in 4 steps: 1 4 is the fastest search speed. 2 3 4 1. GUsing the buttons on the remote controlH The search is started by pressing [6], [7] during playback. The search speed can be changed by pressing [6], [7]. [. . . ] "FAT Error" or "Cluster ·An unsupported file system ·Please use a USB memory Err" appear on the is being used. USB memory device formatted with a display. device below 128 MB cannot compatible file system be supported. (FAT32 or FAT16) and that has at least 256 MB of memory. [. . . ]