User manual MARANTZ SR 4500

[. . . ] 5J/PPC CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. Press the SIMPLE SETUP button on the unit to enter this menu. INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Four digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. The Input Setup consists of 6 items, which are as below. 0 (ch) • D1AUTO to D4AUTO : Digital AUTO mode If the input signal from the selected source is digital signal, this unit chooses a digital input automatically. €¢ ANA : Analog mode Use this menu to select the digital input jack to be assigned to the input source. The relation of the room size and floor space ND RECEIVER SR4500 4. Press the SIMPLE SETUP button on the unit to enter the “SPEAKERS” menu. press or cursor button to select the speaker number. Press the cursor button to enter the “ROOM” menu. press or cursor button to select the room size. After finishing all setup, press the cursor button to exit the SIMPLE SETUP menu. 1 m) OSD MENU Note • All Simple Setup menu is reset when the speaker setting is changed with Speaker Setup menu. 4 m) SBR (S) (F) The relation of the room size and floor space is a roughly standard. Press the ENTER button to enter the menu. Press the or cursor button to select the input source. 5J/PPC ENGLISH MENU STRUCTURE of Simple Setup The relation of the speakers number and conectted speaker 5. If you finish these setup, press the or cursor button to select “TO MAIN MENU” then press the ENTER button to return the SETUP MENU. Or press the or cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU. Select when a subwoofer is not connected. [. . . ] The center speaker cable connection is Connect the cable correctly. STEREO has been selected for Surround When STEREO is selected for Surround mode, no mode. Sound will be output from the center speaker. Center = NONE has been selected in Make the correct setting. [. . . ]