User manual MARANTZ VP8600

[. . . ] Model VP8600 User Guide DLPTM Projector CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Install in accordance with the manufacture's instructions. [. . . ] The color control is not available in PC mode. 1. Press the COL+ / COL­ button. The color slide bar appears. CONTRAST CONCON+ BRIGHTNESS BRIBRI+ 2. Press the COL+ / COL­ button to Sharpness Control Use the sharpness control to adjust the image sharpness. The sharpness control is not available in PC mode. increase/decrease the color. COL+ COL- SHA+ SHAPRAESS TINT+ TINT TINT- COL+ COLOR COL- WHITE PEAK W-PEAK INFO. 3. Press the EXIT button to close the color slide bar. SHA- 1. Press the SHA+ / SHA­ button. The sharpness slide bar appears. CONTRAST CONCON+ BRIGHTNESS BRIBRI+ 2. Press the SHA+ / SHA­ button to increase/decrease the sharpness. SHA+ SHASHA+ SHAPRAESS SHATINT+ TINT TINTCOL+ COLOR COL- WHITE PEAK W-PEAK INFO. 3. Press the EXIT button to close the sharpness slide bar. Brightness Control Use the brightness control to adjust the overall light output. 1. Press the BRI+ / BRI­ button. EXIT For Video The brightness slide bar appears. FREEZE PIP ON/OFF INPUT SWAP MENU 2. Press the BRI+ / BRI­ button to increase/decrease the brightness. For PC/HD CONTRAST BRIGHTNESS BRIBRI+ 3. Press the EXIT button to close the brightness slide bar. BRIBRI+ CON- CON+ SHA+ SHAPRAESS SHA- TINT+ TINT TINT- COL+ COLOR COL- WHITE PEAK W-PEAK INFO. 11 ENGLISH Use the tint control to adjust color hue to obtain true color reproduction. The tint control is not available in PC mode. Color Temperature Control Select the color temperature according to the source. 4 setting provides optimum color tracking. 4 setting provides maximum projector light output. Everytime the button is pressed, the selection rotates in order of Color temp. 4 DV1 RGB V N The Screen Images in a 16:9 screen THEATER STANDARD DYNAMIC ZOOM1 ENGLISH THTR STD DYN C-TEMP Z1 ZOOM2 LOW-BRIGHT- HIGH LB HB CT Z2 C-TEMP CT · Press the NORMAL button on the remote controller for the 4:3 aspect ratio video source. · Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. · Press the FULL, ZOOM 1 or ZOOM 2 button on the remote controller for the squeezed video source. Original Source Image 16 : 9 video source 4 : 3 video source Full mode Aspect Control Use the aspect control to adjust the aspect ratio of the projected image. An aspect ratio can be directly selected by pressing one of the FULL, NORMAL, ZOOM1 and ZOOM2 buttons on the remote control, or it can be selected from the menu ( P. 19) The following settings are supported: COMP. 1 COMP. 2 S VIDEO FULL The 16:9 squeezed image is displayed with the correct aspect. FULL F NORMAL N ZOOM1 Z1 ZOOM2 Z2 The 4:3 image is enlarged horizontally. C1 DVI C2 RGB S VIDEO F NORMAL DV1 RGB V N THEATER STANDARD DYNAMIC ZOOM1 Normal mode The picture in normal ratio 4:3 is displayed. THTR STD DYN C-TEMP Z1 ZOOM2 LOW-BRIGHT- HIGH LB HB CT Z2 ASPECT RATIO FULL (16:9) NORMAL (4:3) ZOOM1 (1. 88:1) ZOOM2 (2. 35:1) DESCRIPTION Wide screen TV format (anamorphic format) Standard TV format Flat movie format Panavision or Cinemascope format Zoom 1 mode The 16:9 image is squeezed vertically into 1. 88:1 aspect ratio. Zoom 2 mode The 16:9 image is squeezed vertically into 2. 35:1 aspect ratio. 12 The Screen Images in a 4:3 screen · Press the NORMAL button on the remote controller for the 4:3 aspect ratio video source. · Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. · Press the FULL, ZOOM 1 or ZOOM 2 button on the remote controller for the squeezed video source. To Turn off the Power 1. [. . . ] Ensure the power source is good by testing with another electrical device. Restart the projector in the correct order and check that the Power LED is blue. Have the lamp module replaced. Problem: The lamp goes off 1. Power surges can cause the lamp to turn off. [. . . ]