User manual MARCONI 2022D

[. . . ] A/C power adapter:  Insert enclosed 5-volt a/c power adapter into a wall outlet, then into the Forecast Station. Battery Compartment 5-Volt a/c adapter INITIAL SET UP: 1. Insert A/C adapter into the wall outlet then into the Forecast Station or insert 3 AA batteries (not included) into the Forecast Station (see Power the Forecast Station). The Forecast Station will light up and show, indoor temperature, humidity and channel 1. Insert 2 fresh AA batteries into the transmitter, observing the correct polarity (see Install Batteries in the Outdoor Transmitter). [. . . ] Press and release the +/RCC or -/°C/°F button to set the year (between year 2010-2039). Press the SET button again to confirm and to enter the month setting. Press and release the +/RCC or -/°C/°F button to set the month. Press the SET button again to confirm and enter date setting. Press and release the +/RCC or -/°C/°F button to set the date. Confirm all calendar settings with the SET button to confirm and exit the program menu. For example: you can use the USB charge cord to connect your cell phone to the USB charge port on the back of the Weather Station and allow your phone to charge. The Weather Station must be operating with a/c power in order to charge your device. DO NOT try to charge the weather station by connecting a USB cable from the Weather Station to your computer etc. This is an output port only. 1M. 1D Note: The day of the week will set automatically once the year, month and date are set. Integrated USB Charge Port FAHRENHEIT/CELSIUS: 1. Press and release the -/°C/°F button once to switch from Fahrenheit to Celsius. Charge a device: 1. Connect your existing USB charging cord for your external device to the USB charging port on the back of the Forecast Station to charge. It is the apparent temperature of how hot it feels to a human being. When relative humidity increases, the air feels warmer than it actually is because your body is less able to cool effectively by evaporation of perspiration. Note: Heat index will be the same number as the temperature until the temperature is above 80 degrees °F (26. 7°C). USE MULTIPLE OUTDOOR TRANSMITTERS: The Forecast Station will accommodate up to three remote outdoor transmitters (TX14TH). The channel selection button allows you to easily see the temperature in various locations: outdoors, baby’s room, greenhouse, basement, etc. To connect multiple remote transmitters to the Forecast Station: 1. Remove the battery cover from all the transmitters (Leave battery covers off until all transmitters are received by the Forecast Station). Set the first outdoor transmitter to Channel 1 and insert 2-AA batteries. Set the second outdoor transmitter to Channel 2 and insert 2-AA batteries. Set the third outdoor transmitter to Channel 3 and insert 2-AA batteries. Press and hold CH button on Forecast Station until a beep sounds. The Forecast Station will search for all outdoor transmitters. [. . . ] This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. [. . . ]