User manual MARMITEK 4IN1

[. . . ] Correct use This remote control unit is capable of controlling most television sets, video-recorders, and satellite recievers generally available on the market. you will find the codes for the most frequently available equipment in the code list for the 4IN1 remote control unit. This remote control unit is designed for the use indoors, and does not alter or modify the product in any way. the unit has been inspected and approves unde BZT and CE regulations. [. . . ] 3 Code library The codes for the most frequently available television sets, video recorders and satellite recievers are available in the code list library, and a complete list in the Code List attached to these usage instructions. Note: The three-digit code numbers allocated in this library are not the same as the ones in the code libraries drawn up by other manufacturers. 4 Punch Through The punch through allows the user to activate the "volume" and "mute" controls of the television set even when the remote control unit is in "VCR" or "SAT" mode, without having to switch back to "TV". 5 Entering codes directly from the code library The codes for the various items of equipment can be found in the code list attached to these instructions. Press the "SETUP" button and hold it down until the diode lights up. If an invalid code is entered, the diode will flash for three seconds before going out. The direct transfer of the code for your set has now been completed. NOTE: If a number of codes are shown for one manufacturer, please try them all out until you find the right one. After the code has been entered, check that the television set reacts correctly to commands from the remote control unit. If no functioning code can be found under the name of the manufacturer, a code search will have to be carried. 6 Code search You have the facility available of searching through the all codes in the library in order to find a certain television set that does not appear in the library list or that does appear in the library but under another manufacturer's name. ) on manually that you wish to control Press the "SETUP" button down and hold it down until the diode lights up. ) Press the "CHANNEL +" button (next channel upwards in the list), or "POWER', or "PLAY" (only applies to VCR) as many times as necessary until the equipment that is to be controlled changes channel or reacts appropriately. If the user accidentally overshoots the required code, he or she should press the "REW" (symbol) button as many times as necessary to go back through the library until the equipment changes channel or reacts appropriately. The transfer of the code from the code-search mode has now been completed. Note: If the equipment does not possess a "CHANNEL+" button, use the "PLAY" (only on VCR) or "POWER"button. The code search will start with the 3-digit number in this mode, e. If the mode contains 100 codes and the one stored at that moment is 050 the search will start at 051 and run through to 100, then jump back to 000 and continue searching through to 050. This simplifies the procedure of more than one code can control your equipment because it skips the ones it has already tested. Note: It should be noted, when entering or searching for codes, that the correct code is not entered until the television set is completely capable of being operated. [. . . ] Controlling your home using Marmitek X-10 Home Automation Modules (available seperately) The Marmitek 4 in 1 remote allows you to control practically everything electrical in your home. Besides IR technology that lets you control all your TV, VCR, Cable and Satellite equipment it has X10 RF technology (model 09048 RF 433MHz only) that lets you control lamps and appliances anywhere in your home remotely. Here are just some of the things you can do with your Marmitek 4in 1 remote using the Marmitek X-10 feature: · Turn lights off or on and dim then while watching TV Start the coffee from your bedroom when you wake up Turn on lights at night to scare away intruders if you hear a noise Turn on your electric blanket before the movie ends, so it's nice and warm to go to bed Home Automation Modules, which just plug into the existing wall sockets. Use the number buttons to enter the Unit Code number of the chosen Module (You do not need to enter `0' first for a single digit number). [. . . ]