User manual MARMITEK DOORGUARD 400

[. . . ] Never connect an adapter or power cord when it is damaged. Congratulations on your purchase of the Marmitek DoorGuard400TM. Using this video-door phone you can hear and see the visitor at the door (without the visitor being aware of it) before you decide to open it. The camera is concealed in the small doorbell and delivers high quality pictures, even in the dark. [. . . ] Mounting the monitor onto the wall (figure 7). Take the monitor and attach the connector(s) of the cable(s) in the right connectors (see figure 5). Now place the monitor against the wall plate and move it up and down against the plate such that it snap-locks onto the plate. You can always detach the monitor by simply sliding it upward. Insert the power plug into the power socket. Your DoorGuard400TM has now been successfully installed and is ready for use. As soon as a visitor rings the doorbell by pressing on the doorbell button, the image will appear instantly on the monitor in the house. This way you can see who is at the door before you decide to open it (or pretend you're not at home). To speak to the visitor, you simply press the monitor button (13). If you have also installed an electric door opener, you can open the door by pressing on the door-open button (15). You have installed multiple monitors in the house (maximum 3 extra), then you can talk among each other using the intercom button (14). - You need an electric door opener with its own power supply. the door-open-contact of the monitor is a potential-free normally-open (NO) contact. - The maximum load for this contact is: DC24V/1A or AC24V/1A. - You need to connect the door opener onto the L+ en L- connectors of the monitor, using the supplied cable. Connecting multiple monitors - To be able to see who is at the door from several places (max. Upon that, you now have an intercom system (figure 9). Beware: Only the last monitor that you connect should be switched on 75 Ohm. The other monitors should be connected parallel. to connect the extra monitor , the 10meter connection cable is provided with an extra connector at the monitor end. [. . . ] The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. [. . . ]