User manual MARMITEK EASYCONTROL 8 BROCHURE

[. . . ] To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc. Do not expose the components of your systems to extremely high temperatures or bright light sources. [. . . ] For example, if you have three video recorders, you can assign video recorder 1 to the VCR button, assign video recorder 2 to the DVD button and video recorder 3 to the SAT button. Please note: The TV button can only be used for TV codes. You will find one or more 3-digit codes. If there is more than one code, it depends on the type of device which code you need to use. Generally the codes will be listed in order of age of the device. Older appliances first, newer appliances last. It is possible you may have to try various codes before you find the correct code for your device: 1. Turn on the device (for example the TV). Press SETUP (9) and keep this button pressed until one of the mode LEDs stays lit. Press the Mode button (2) for the device that you want to operate (for example TV) and release this button. Enter the 3-digit code from the code book via the numeric keys (9). the LED will extinguish after the last digit has been entered. The LED will flash for 3 seconds if you have entered the wrong code. ) If certain functions do not work, the wrong code was entered. Repeat the previous steps and enter the next code from the list. Repeat the procedure from step 1 for any other device that you wish to program (video, DVD player, satellite, etc). 2 Automatically search for common brands If your brand is listed here, you can search by brand (this is quicker than searching manually or automatically) Turn the device you want to operate on. Press SETUP (9) and keep this button pressed until one of the mode LEDs stays lit. Enter the code matching your brand, point the EasyControl 8 remote control at the device and press Prog+ (6) once. Keep the remote control pointed at the device until it changes channel. If you accidentally miss the code, you can stop the search by pressing Prog- (6) and go back to the correct code by repeatedly pressing this button. Note: If certain functions of your device do not work, try the next code for your brand. [. . . ] No hassle with extra cables: extra wiring is not necessary because the The first command of a macro always needs to consist of a Mode button (TV, VCR, etc) You may have to enter a delay in the macro (e. Press PAUSE (23) followed by a numerical key (1-9) to enter a delay of between 1 and 9 seconds. the standard delay between the separate macro commands is half a second. The macro buttons can execute both infrared (IR) and radio frequency (RF) commands. [. . . ]