User manual MARMITEK SPEAKER ANYWHERE 350

[. . . ] Do not expose the components of your systems to extremely high temperatures or bright light sources. In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility. [. . . ] The Marmitek products are manufactured with the utmost precision and are of high quality. Please read this manual first and follow the instructions so you can enjoy the possibilities of this product optimally. The back of the transmitter has an audio cord that can be connected to audio output (normally indicated with or AUDIO OUT) of i. 5mm jack Audio out, you can use the supplied 6. With batteries Insert 6 pieces `AA' size ALKALINE batteries (not included) into the battery compartment with correct polarity. For using the batteries, make sure the Power adapter is not connected. Note: Remove the batteries when they are empty or if you are not using the device for a longer period. With supplied power adapter Connect the power adapter to the Power connection [10] on the rear of the speaker, then plug it to the electrical wall outlet. Plug the power adapter in the electrical wall outlet and the Power LED ( ) will light up. Turn on the audio source (TV, PC, Radio, CD-/MP3-/MP4-/DVD player) to which the transmitter is connected. Adjust the volume to the level you desire by pressing the Volume button on the speaker [8] or turning the volume button of your audio source. Tip: - For crystal clear sound, put the volume of the audio source higher and adjust the volume of the speakers to the desired level. - Place the speaker on the floor for the best possible sound. Different bases can influence the sound quality. Experiment at different places to determine the best sound quality. Therefore put the speaker and transmitter together (max 7meters in-between). push the "TUNING" button on the speaker [7]. Whenever you find frequency jam, move your channel switch from one channel to the other channel on the back of the transmitter, and then press the "TUNING" button [7] on the speaker again. switching the speaker ON/OFF/Stand-by Turn the speaker ON/ OFF by pushing the button at the front of the speaker [6]. The blue signal LED on the speaker indicates whether the speaker is switched ON or OFF. [. . . ] Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Hereby, Marmitek BV, declares that this Speaker Anywhere350 is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes Speaker Anywhere350 den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtliniën: Richtlinie 1999/5/EG des Europäischen Parlaments und des Rates vom 9. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B. [. . . ]