User manual MARSHALL AMPLIFIER MG10KK KERRY KING COMBO

[. . . ] The MG Series raises the standard for what can be expected from a value-for-money range of guitar amplifiers, some might dismiss the MG10KK as only being 10 Watts, but not me, its 10 Watts of tone that delivers the Marshall sound and as we've seen strong enough to take the knocks of a world tour or two. Kerry worked with my graphics team and hand picked the final design. The classic gold Marshall panel has been stained red while its black knobs and tribal tattoo design are in stark contrast to its bold white text. [. . . ] Rhythm & Bruise - Picking Pattern 1. Rhythm & Bruise - Getting Down On Picking. Rhythm & Bruise - Picking Pattern 2. Rhythm & Bruise - Gallop & Reverse Gallop. Rhythm & Bruise - `Survival Of The Fittest'. Rhythm & Bruise - Inverted Power Chords. `Expendable Youth' 12 Tone Riff Slowly. Visit Kerry Kings website - www. kfkministries. com 2. Clean VOLUME control When the OD Select switch is `out', this control adjusts the volume of the Clean Channel. At low settings the sound will be very clean with a belllike ring. Turning this control above half way will introduce a desirable, bluesy distortion as the power amplifier is driven into `crunch mode'. 3. OD (Overdrive) SELECT switch Depressing the Overdrive Select Switch will engage the Overdrive Channel. 4. Overdrive GAIN control Turning up the Overdrive Gain Control will increase the amount of distortion generated in the Overdrive channel. Low gain settings will produce classic rock and blues tones. Crank the Gain for fat and aggressive sounds that are perfect for soloing or hard rock and nu-metal riffs. 8. EMULATED HEADPHONES jack Plug your headphones here for a killer speaker emulated sound! [. . . ] CONTOUR control This highly effective tone control works on both the Clean and Overdrive channels. By radically modifying the mid-range (body), the tone can range from traditional and woody sounding (setting at 10), to aggressive, `scooped' and modern (setting at 0) and all points in-between. EUROPE ONLY - Note: This equipment has been tested and found to comply with the requirements of the EMC Directive (Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage Directive in the E. U. EUROPE ONLY - Note: The Peak Inrush current for the MG10KK is 2 amps. Follow all instructions and heed all warnings KEEP THESE INSTRUCTIONS ! [. . . ]