User manual MARTIN AUDIO C516

[. . . ] 2. 1 Contents of A 1-pack 1 loudspeaker baffle 1 back-can (complete with steel strip spring) 1 support bracket + wing nut 2 Martin Audio ­ C516 Ceiling Loudspeaker ENGLISH CONTENTS < 3 > PRINT GUIDES CEILING TYPE Before beginning the installation, it is important to evaluate the construction of the ceiling. The type of ceiling will affect the installation procedure and method of connection. [. . . ] Depending on local electrical codes, flexible metallic tubing or conduit may have to be used in conjunction with metal cable glands. The terminal block within the back-can will accept stripped wires. To prepare the wires for connection, strip back approximately 8mm. Pull the steel strip spring in the back-can to its down position. Insert the stripped wires into push-terminal block in back-can. Please note that it is important to maintain consistent polarity throughout. If support rails are to be used feed them up through the ceiling cut-out and place them in parallel positions on either side of the cut-out. 4 Martin Audio ­ C516 Ceiling Loudspeaker ENGLISH CONTENTS < > PRINT GUIDES 5. Put the support bracket through the ceiling cut-out and stand it up on the ceiling rear surface. If support rails are used, place the feet over the rails (see Fig. Push the back-can up through the cut-out and locate the hole in the rear of the back-can on the stud at the centre of the support bracket (see Fig. This will sandwich the ceiling between the support bracket and the front lip of the can. 5 Martin Audio ­ C516 Ceiling Loudspeaker ENGLISH CONTENTS < > PRINT GUIDES 4. 2 Second fix 1. Attach the safety wire between the back can and loudspeaker baffle with a screwdriver. With the steel strip spring in its down position, insert the stud attached to the loudspeaker magnet through the hole in the strip spring (see Fig. Push the retaining clip through the small hole in the stud. [. . . ] Please note that Martin Audio cannot accept responsibility for the quality of finish obtained 7 WARRANTY Martin Audio C516 Ceiling Loudspeaker is warranted against manufacturing defects in materials or craftsmanship over a period of 5 years from the date of original purchase. During the warranty period Martin Audio will, at it's discretion, either repair or replace products which prove to be defective provided that the product is returned in its original packaging, shipping prepaid, to an authorised Martin Audio service agent or distributor. [. . . ]