User manual MARTIN AUDIO WT3

[. . . ] The WT15 features externally switchable 4 or 16 ohm operation. Its input configuration is also switchable, allowing daisy-chaining of cabinets ­ even when fed with different input signals. It is fitted with 3/8" threaded inserts to enable its use on a microphone stand or with an under-balcony yoke. [. . . ] Be aware that speakers producing very high power levels can move or creep. To avoid this, place friction material between the floor and speaker and between each speaker. 4. 3 Rigging and Suspension WARNING: Suspending the system should only be done by qualified personnel following safe rigging practices. Secure fixings to the building structure are vital. Seek help from architects, structural engineers or other specialists if in any doubt. The WT2 and WT3 are provided with threaded inserts to allow the suspension of a single enclosure. Never suspend one enclosure from another to form an array or cluster using these fittings. The enclosures are provided with optional MAN flying points for array construction. The common practice of using commercially available eye bolts for suspension should only be undertaken with great caution. Eye bolts are strongest along the thread axis. Angling the enclosures will result in an angle pull and it is important to use eye bolts that are safe in these circumstances. Only forged shoulder eye bolts should be considered and it is important that the thread length is at least 30mm. A flat washer should be inserted between the eyebolt and the enclosure. those which are formed from a steel rod bent into an eye should be avoided. All material © 2007. Subject to change without notice. 4 Martin Audio ­ WAVEFRONT THEATRE SERIES CONTENTS < > ENGLISH PRINT GUIDES 5 AMPLIFICATION Wavefront Theatre Series loudspeakers are designed to be used with professional power amplifiers capable of producing the following power outputs into 4 ohms: WT15 WT15 WT2 WT3 4 ohm 16 ohm 50-100W 200-400W 400-600W 400-800W Care should be taken to avoid amplifier clipping. It is important to understand that a low power amplifier driven into clipping is more likely to damage a loudspeaker than a higher power amplifier used within its ratings. [. . . ] During the warranty period Martin Audio will, at it's discretion, either repair or replace products which prove to be defective provided that the product is returned in its original packaging, shipping prepaid, to an authorised Martin Audio service agent or distributor. cannot be held responsible for defects caused by unauthorised modifications, improper use, negligence, exposure to inclement weather conditions, act of God or accident, or any use of this product that is not in accordance with the instructions provided by Martin Audio. Martin Audio is not liable for consequential damages. [. . . ]