User manual MARTIN MAC 350 ENTOUR DATASHEET

[. . . ] Specifications MAC 350 Entour Crowded House. All photos Allan Toft Physical Length: 377 mm (14. 8 in. ) including handles Width (Base): 220 mm (8. 7 in. ) Height: 454 mm (17. 9 in. ), head horizontal Height: 471 mm (18. 5 in. ), head straght up Weight: 16. 6 kg (36. 6 lbs. ) Dynamic Effects Shutter effect: Electronic, with regular and random pulse, burst and strobe effects Electronic dimming: 0 - 100%, choice of four dimming curves Color wheel: 8 interchangeable dichroic filters + open, full and split colors, music trig, continuous rotation, random color Rotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shake Iris: Motorized, with pulse and random effects Focus: 2 m (6. 6 ft. ) to infinity Pan: 540° Tilt: 257° Adjustable pan/tilt and effects speed Optics Light source: 7 x Luminus CBT-90 (50 W) LEDs Minimum LED lifetime: 60 000 hours (to >70% luminous output)* *LED manufacturer´s figure obtained under manufacturer´s test conditions Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 14/17 Setting and addressing: Control panel with LED display Macro programs: 10 pan/tilt and 10 effects macros, all with staggered start/chase feature Macro selection: DMX or onboard control panel Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Stand-alone memory: 100 scenes Stand-alone and master/slave programming: Control panel with LED display Transceiver: RS-485 Fixture software update: Serial upload via DMX link 16-bit control: Rotating gobo indexing, pan & tilt Photometric Data Total output: 8000 lm Color temperature: 6500 K CRI (color rendering index): 70 Efficiency: 55% Efficacy: 18. 6 lumens per watt Construction Color: Black Housing: UV-resistant fiber-reinforced composite and die-cast aluminum Protection rating: IP20 Installation Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Minimum distance to combustible materials: 200 mm (7. 9 in. ) Minimum distance to illuminated surfaces: 0. 5 m (1. 6 ft. ) Connections AC power input: Neutrik PowerCon DMX data in/out: 5-pin locking XLR Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Main fuses: 10 AT (slow blow) x 2 Standby power: Max. 49 W (idle mode, dimmed to zero) Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max. ): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C (104° F): 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 1580 BTU/hr. [. . . ] The first real alternative to HID-based profile fixtures As the brightest LED profile on the market to date, light output is exceptional. The MAC 350 Entour delivers 8, 000 lumens of output from seven extremely efficient 50 W white LEDs, an output greater than many larger 250/300 watt fixtures and four times more than comparable fixtures. Energy saving Yet the MAC 350 Entour is an energy saving fixture as well. Unlike HID fixtures, it saves on energy by using very little power when the LED sources are not in use and only draws power at the level required. Power consumption is only 450 W with all LEDs at full and only 18 W when idle. Interchangeable colors, fresh designs The MAC 350 Entour houses 8 easily interchangeable dichroic colors with split color effects and continuous rotation. Color filters are easy to change via an easy-access lid. Six continuously rotating and indexable gobos, all new designs, are easy to change via an easy-access lid. Auto or music-triggered shake effects are also possible. Superior optics A superior optical system and variable focus produce crisp images or unfocused background effects with no color artifacts. Optical quality is superior to other products in its class. Beam angle is 25° for a larger projection area, making the fixture ideal for a variety of installation settings like bars, lounges, restaurants and shops. And unlike most fixtures of its size, the beam can be quickly and accurately resized via a motorized iris for longer throws. Image quality is sharp and clean with a deep field of focus that remains sharp when projected at steep angles. [. . . ] An extremely durable and modular construction makes service and maintenance an easier process, saving on costs and total cost of ownership. Control options Industry standard DMX-512 controllable, the MAC 350 Entour also operates in stand-alone mode (with master/ slave) without the need for a lighting controller. For even greater maintenance ease - and savings in time and money - the MAC 350 Entour will support RDM feedback protocol as a future firmware release. The MAC 350 Entour automatically adjusts for different voltages via an auto-sensing SMPS system for full worldwide compatibility. A motorized focus gives sharp projections or out-of-focus effects. Electronic dimming is both uniform and smooth with user-selectable dimmer curves available. Rotational and indexable glass and metal gobos provide great beam and projection effects. [. . . ]