User manual MATSONIC MS7016S

[. . . ] The information presented in this publication has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. Specifications are subject to change without notice. Trademarks IBM, PC/AT, and PC/XT are trademarks of International Business Machines Corporation. Intel and Pentium II are trademarks of Intel Corporation. AMI is a trademark of American Megatrends Inc. MS-DOS and WINDOWS NT are registered trademarks of Microsoft Corporation. ii Contents Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Game connector is also the Joystic connector. Click the START button on the Windows 95 task bar. Select Shut Down The Computer to turn off the computer. The message It is now safe to turn off your computer. will not be shown when using this function. J5 (19, 20) (PWR_ON) ATX Power Button and Suspend Switch Connector Attach the ATX Power Button or Suspend Switch cable to this connector. In the AT power system, this connector will act as a suspend switch; and in the ATX power system, this connector will be not only an ATX power button but a Suspend switch as well. Details are described below: When the system is off, push the power button to turn the system on. When the system is on, push the power button rapidly to switch the system to the Suspend mode, and, by pushing and holding the button for more than 4 seconds, it will turn the system completely off. When the system is in the Suspend mode, push the power button rapidly to turn the system on. Chapter 4 BIOS Setup This chapter explains how to configure the mainboards BIOS setup program. The setup program provided with the mainboard is the BIOS from AMI. After you have configured the mainboard and have assembled the components, turn on the computer and run the software setup to ensure that the system information is correct. The software setup of the system board is achieved through Basic Input-Output System (BIOS) programming. You use the BIOS setup program to tell the operating system what type of devices are connected to your system board. The system setup is also called CMOS setup. Normally, you need to run system setup if either the hardware is not identical with information contained in the CMOS RAM, or if the CMOS RAM has lost power. Note: Hold down the <End> key then power on to reboot the system when installing newer BIOS into this mainboard . 20 Chapter 4 Entering BIOS Setup To enter the BIOS Setup program: 1. A screen appears with a series of diagnostic checks. When Hit <DEL> if you want to run SETUP appears, press the <DEL> key to enter the BIOS setup program. The following screen appears: 2. AMIBIOS SIMPLE SETUP UTILITY - VERSION 1. 1x (C)1997 American megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup PCI/Plug and Play Setup Load Optional Settings Load Best Performance Settings Esc: Quit : Select Item (Shift) F2: Change Color F6: Optional values F7: Best performance values F5: Old Values F10 : Save&Exit Peripheral Setup Change Supervisor Password Auto-Detect Hard Disks Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. 3. Use your keyboard or mouse to choose options. Modify system parameters to reflect system options. Press Alt-H for Help. BIOS Setup 21 Default Every option in the BIOS Setup contains two default values: Best default and the Optimal default value. Load Optimal Settings The Optimal default values provide optimum system settings for all devices and system features. Load Best Performance Settings The Best default values provide best performance settings for all devices and system features, but dependent used devices and we arent guaranty that system run overnight on these settings. Setup Items Standard CMOS Setup Choosing the item from the BIOS Setup main menu. [. . . ] This option is used to allocate IRQ to PCI VGA. Recommendation is set to No. PCI VGA Palette Snoop Allocate IRQ to PCI VGA OffBoard PCI IDE This option specifies if an offboard PCI IDE Card controller adapter card is installed in the computer. You must specify the PCI expansion slot on the motherboard where the offboard PCI IDE controller is installed. If an offboard PCI IDE controller is used, the onboard IDE controller is automatically disabled. [. . . ]