User manual MATSONIC MS7188D VERSION 5.2

[. . . ] Mainboard User's Manual This publication, photographs, illustrations and software are under the protection of international copyright laws and all rights reserved. It does not allow any reproduction of this manual, content and any materials contained herein without the written consent of the authentic manufacturer. The information in this manual is subject to change without notice. The manufacturer does neither represent nor warrant the contents hereof; and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. [. . . ] Defaults Load Optimized Defaults Set Password Save & Exit Setup Exit Without Saving You can use cursor arrow keys to highlight anyone of options on the main menu page. Press Enter to select the highlighted option. Press the Escape key to leave the setup utility. Hold down the Shift key and press F2 to cycle through the Setup Utility's optional color schemes. Some options on the main menu page lead to tables of items with installed values that you can use cursor arrow keys to highlight one item, and press PgUp and PgDn keys to cycle through alternative values of that item. The other options on the main menu page lead to dialog boxes that require your answer Yes or No by hitting the Y or N keys. If you have already changed the setup utility, press F10 to save those changes and exit the utility. Press F5 to reset the changes to the original values. Press F6 to install the setup utility with a set of default values. Press F7 to install the setup utility with a set of high-performance values. 14 3: BIOS Setup Utility Standard CMOS Features Page This page helps you set up basic information such as the date and time, the IDE devices, and the diskette drives. CMOS Setup Utility ­ Copyright (C) 1984 ­ 2001 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary Slave Drive A Drive B Video Halt On Base Memory Extended Memory Total Memory 1. 44M, 3. 5 in. None EGA/VGA All , But Keyboard 640K 65535K 1024K F1:General Help Mon Dec. 3 2001 14 : 49 : 26 Item Help Menu Level Change the day, month, year and century. Enter : Select +/-/PU/PD:Value F10: Save ESC: Exit : Move F5:Previous Values F6:BestPref. Defaults F7:Optimized Defaults Date & Time IDE Devices Use these items to set the system date and time Your computer has two IDE channels (Primary and Secondary) and each channel can be installed with one or two devices (Master and Slave). Use these items to configure each device on the IDE channel. Press Enter to display the IDE sub-menu. Press Esc to close the IDE device sub-menu and return to the Standard CMOS Features page. Use these items to set the size and capacity of the floppy diskette drive(s) installed in the system. This item defines the video mode of the system. This mainboard has a built-in VGA graphics system; you must leave this item at the default value. Floppy Drive A Floppy Drive B Video 15 Mainboard User's Manual Halt On This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to select which types of errors in the POST are sufficient to halt the system. These items are automatically detected by the system at start up time. You can't make changes to these fields. Base/Extended/ Total Memory Advanced BIOS Features Page This page sets up more advanced information about your system. [. . . ] These files may contain important information that is not included in this manual. Mainboard User's Manual Drivers Installation Audio Drivers and Software Most of the sub-folders in this folder are empty, with a short README file giving directions to alternate folders for the appropriate software. Installation for Windows XP/2000/98/98SE/ME/95 To install the audio drivers, go the directory \VIA\ AC97audio\ then run SETUP. EXE. Installation for Windows NT4. 0 1. Click Settings and then click Control Panel. Select the item "Unlisted or Updated Driver" in the List of Drivers in the list box and then specify the path to the PCI audio NT drivers (\VIA\ AC97audio\ Winnt40). Choose the proper I/O or click OK for the default setting. [. . . ]