User manual MAXDATA MPL 520 ANHANG RACKINSTALLATION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAXDATA MPL 520 ANHANG RACKINSTALLATION. We hope that this MAXDATA MPL 520 ANHANG RACKINSTALLATION user guide will be useful to you.
Lastmanuals help download the user guide MAXDATA MPL 520 ANHANG RACKINSTALLATION.
Manual abstract: user guide MAXDATA MPL 520 ANHANG RACKINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] MAXDATA PLATINUM 520/220 Installation Guide for the Rack-Mount Slide Rail Kit
Parts List
The following is a list of all the parts that are relevant for installation; each part is designated with a letter that is used in the installation guide.
External Rail The middle rail (B) is slid inside the external rail (A) and the internal rail (C) in turn is inside the middle rail (B).
Middle Rail
Internal Rail
End Bracket
Round head screw, large
Round head screw, small
Nut
Perforated Plate with threaded holes
NOTE
Countersunk screws are not required.
Tip: Customers with a MAXDATA rack can simplify installation of the server by taking the screws, washers, and clamping nuts from the fastening set of their cabinet.
MAXDATA PLATINUM 520/220
1
Installation
1. [. . . ] At-tach the silver end brackets (D) to the external rail (A) with two screws (E) and two nuts (G) each. Be careful to make sure that the distance between the fastening bracket for the external rail (A) and the end bracket (D) is the same as the distance between both bread-board sections of your server cabinet.
2
Installation Guide for the Rack-Mount Slide Rail Kit
4. Attach the rails in the rear of the server cabinet with the silver end brackets (D). First hold the fastening bracket up to the breadboard. Then set the perforated plate with the threa-ded holes (H) behind the breadboard section. Finish by inserting the screws (E) from the front through the breadboard and the fastening bracket to the perforated plates (H)
Front: A Rear: D
5. [. . . ] To be able to slide the server completely inside, you have to push in the locking device at both sides of the rails.
MAXDATA PLATINUM 520/220
3 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXDATA MPL 520 ANHANG RACKINSTALLATION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXDATA MPL 520 ANHANG RACKINSTALLATION will begin.
