User manual MAXDATA PG SR 1202

[. . . ] Combining high performance with investment security: MAXDATA SR 1202 Combining high performance with investment security: MAXDATA SR 1202 Product characteristics The volume of business-relevant information is increasing at breath-taking speed every day. Whether a company can remain competitive is becoming more and more a question of the performance of their storage solutions. [. . . ] Also, the system's memory can be upgraded to 30 TB using 500 GB S-ATA hard drives, ensuring top investment security. Data lifecycle management in a box: Perfect data management even for highly complex applications High scalability: Allows upgrading to 30 TB Microsoft® WHQL: Easy installation due to certified components Expansion during full operation: Dynamic online RAID and online LUN expansions allow upgrading without any interruption to the normal operation Use of Microsoft® WHQL -certified components makes the SR 1202 storage system particularly easy to install. Depending on the options selected, it is either ideally suited as a primary storage for database applications or as a secondary storage for file and directory services. The system is especially recommended for use in expanding small and medium-sized businesses as well as in individual departments of large companies. The OS-independent, web-based StorView® administration tool makes SR 1202 a favourite for use in heterogeneous environments. Key facts Data lifecycle management in a box: Shorter processing times for increasingly complex applications is one of the main challenges facing data storage in businesses. The SR 1202 4 Gbit fibre-channel storage system combines high-performance SAS hard drives with storage-intensive, low-cost SATA hard drives. This enables it to support even the most demanding applications at a high connection speed, considerably simplifying data management. Impressive scalability: Rapidly growing businesses know that good expandability of storage solutions is becoming an increasingly decisive success factor. The SR 1202 storage system, including four SJ 1202 expansion systems, meets this challenge by providing easy scalability from 73 GB up to an impressive 30 TB. Easy installation: Good storage systems should offer more than just smooth operation. The SR 1202 storage system lives up to this demand by using components certified for Microsoft® WHQL. Expansion during normal operation: Easily expandable storage systems give companies a competitive edge, while any downtime means loss of productivity. To avoid this, the SR 1202 storage system can be scaled while remaining fully operational thanks to dynamic online RAID and online LUN expandability. MAXDATA SR 1202 Single Controller and Dual Controller: The facts MAXDATA SR 1202 Single Controller Host interface (per controller): Host fibre channel protocol Drive interface: Redundant hot-swap components: Error / status reporting: Number of RAID controllers: Cache memory: Dynamic cache tuning: Variable stripe size: Volume sharing: Number of LUNs supported: Key features: Two 4 GB/s (400 MB/s) fibre ports (SFP), 400 MB/s per channel (800 MB/s full duplex) MAXDATA SR 1202 Dual Controller Four 4 GB/s (400 MB/s) fibre ports (SFP), 400 MB/s per channel (800 MB/s full duplex) Supports point-to-point, loop and fabric (switched) topologies Two-channel SAS (3 GB/s), one-channel SATA (1. 5 or 3 GB/s) Two-channel SATA I and II with multiplexer transition card Hard drives, RAID controller, battery, power supplies and fans SES (SCSI Enclosure Services) 1 (expandable to 2) 512 MB and 1 GB · · · 512 2 1 GB and 2 GB · · · 512 Up to 64 disk arrays with independent RAID levels 0, 1, 5, 6, 10, 50 Dual active/active RAID controller with automatic failover / failback on the basis of StorView® PathManager MPIO Multiple dedicated or global hot-spare hard disks with automatic disk-drive rebuild for uninterrupted data protection Dedicated channels for mirrored write cache coherence with battery backup unit RAID configuration is written to the hard drives and can be exported as a file for later recovery Uninterruptible controller firmware upload (only for Dual Controller), optional snapshot functionality Auto sensing 85­264 V AC (load balancing with redundant power supplies) 47­63 Hz 4. 5 A at 85 V AC, 1 A at 264 V AC Redundantly configured power supply unit with PFC, 350 watts (425 watts peak) 1, 194 BTUs per system 2 independent EU standard power cables EN 55022 (Class A), EN 55024 (Immunity), CE-EMC Directive (89/336/EEC) UL 60950 3rd Edition, EN 60950-1, EN 61000-3-2, EN 61000-3-3 FCC Part 15 Class A, CISPR 22, BSMI, VCCI, C-TICK, CAN/CSA C22. 22 44. 9 x 52. 4 x 8. 8 cm (W x D x H) (2 HE), weight 15. 9 kg StorView® storage management permits local or remote configuration and monitoring StorView® PathManager MPIO with failover functionality for highly available and redundant data connections Input voltage: Input frequency: Input current (max): Power supply: BTUs per hour (max. ): Power source: Emissions test certificate: Official certification: CE test certificates (EMC): Rack housing: Software: Upgrade options Second controller with 512 MB cache Controller upgrade 1 GB SAS hard disks S-ATA hard disks SFPs 4 GB Snapshot option for up to 24 snapshots per logical disk drive SJ 1202 upgrade chassis (max. four per SR 1202) SAS cable (for connecting SJ 1202) StorView® Global Optional on-site service Warranty 36-month bring-in warranty including 12 monthson-site service within 24 hours (NBD). Additional services and warranty upgrades are available. [. . . ] Windows, Windows Vista and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the USA and/or other countries. Intel is a registered trademark of the Intel Corporation. Phone: +44 (0) 1344 788900 Bracknell, Berkshire, RG12 1QS, UK The MAXDATA Centre, Downmill Road [. . . ]