User manual MAXENT MX-42VM10

[. . . ] Plasma Flat Panel 42" Plasma Monitor Owners Manual Important Safety Instructions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove the front or back covers. Refer servicing to qualified service personnel only. The lightning flash with arrow-head within a triangle is intended to inform the user that parts inside the product are a risk of electric shock. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are explained. Special Notices Certain programs may be copyrighted and any unauthorized recording in whole or in part may be in violation of copyright laws in the U. S. FCC/CSA regulations state that any unauthorized modifications to this display may void user authority to operate it. Warnings & Precautions To prevent damage which may result in fire or shock hazard, do not expose this product to rain or moisture. [. . . ] The OSD on the upper right corner will denote the input signal source for both the main and sub-pictures. PIP Mode M: TV S: AV Input Source for Main Picture Input Source for Sub Picture Sub Picture Main Picture POP Mode M: TV S: AV Input Source for Main Picture Input Source for Sub Picture Sub Picture Main Picture There are two Side-by-Side picture modes available in addition to the standard POP mode. POP (4:3) mode will display both main and subpicture in a 4:3 aspect ratio within the POP windows. POP (16:9) mode will display both main and sub-picture in 16:9 aspect ratio within the POP windows. POP 4:3 Mode Main Picture Sub Picture POP 16:9 Mode Main Picture Sub Picture 36 Picture Controls Selecting Signal Source for Sub-Picture Various signal sources can be displayed within the sub-window under PIP and Side-by-Side picture modes. To select the input source for sub-window, please follow the steps below. Once the PIP mode is turned on, you can change the sub-picture input source by pressing the key. Source Select Pressing the key repeatedly will cycle Note: Please see reference table below for available PIP/POP input combinations. through all available inputs for the sub-picture. Selecting Signal Source for Main Picture Once the PIP mode is turned on, you can change the main picture input source by pressing the key or any one of the DIRECT INPUT KEYS. Input Select (Toggle) Direct Input Selection Keys Available PIP/POP Input Combinations Main-picture and sub-picture input combinations are listed below for reference. Note: All digital TV signals (480i, 480p, 720p, 1080i) received via Component 1 or Component 2 inputs can be displayed in combination with TV or AV inputs. 37 Picture Controls Picture-in-Picture / Side-by-Side Picture (Con't) Main and Sub-Window Swap You can swap the main picture and sub-picture. Press the key once again to switch back. Picture Swap Changing Location of PIP Image There are four preset positions where the PIP sub-window can be positioned. Once the PIP mode is turned on, you can switch the PIP sub-picture position to any one of the four corners of the screen. Press the Pressing the key to switch positions. key repeatedly will cycle Default Position Sub-Picture Positions through all four corners of the screen. 38 Picture Controls Changing Size of PIP Window There are several PIP sub-window sizes available for selection. on the front panel or remote to select the SETUP key to option from the menu and press Various settings are available from the SETUP menu. Use to select the PIP WINDOW SIZE option from the menu and press key to confirm selection. A small display window appears upon selecting the option to change. Press key to confirm setting and return to previous menu. 39 Picture Controls Selecting Color Temperature This monitor is capable of applying various color temperatures (also known as White Balance) onto the video signal for display. on the front panel or remote to select the PICTURE key to option from the menu and press Various settings are available from the PICto select the TURE menu. Use COLOR TEMP option from the menu and press key to confirm selection. A small display window appears upon selecting the option to change. Press key to confirm setting and return to previous menu. Adjusting Screen Size This monitor is equipped with signal auto-synchronization feature that automatically adjusts incoming video signals to fit the screen; therefore, V-Position and H-Position adjustments are disabled under Component and RGB inputs. The following table shows available adjustments for each video input: Input Component Signal Type 480p 720p 1080i VESA 480p 720p 1080i V-Size Disabled Disabled Disabled Disabled Disabled Disabled Disabled V-Position Enabled Enabled Enabled Enabled Enabled Enabled Enabled H-Size Enabled Enabled Enabled Enabled Enabled Enabled Enabled H-Position Enabled Enabled Enabled Enabled Enabled Enabled Enabled RGB 40 Picture Controls In certain special cases, users may desire to manually adjust V-Size. To do so, please use the following procedures: Pressing the key 5 or more times and pressing the key 5 or more times, then pressing the key. V-Size will be enabled in OSD now and this function will be locked again when users turn off monitor. Due to various PC video cards and set-top boxes with differing specifications, it is likely that the initial picture may not fit exactly to the size of the monitor. [. . . ] Make sure that speaker wires remain in the wire groove as brackets are fastened to the speaker. 75 Appendix The completed speaker assembly should look like this. Once both speakers are assembled, go to next step. Connect speaker wire from each speaker to the rear speaker connector located on the back of the display. Make sure that you use speaker wires to connect corresponding speaker connector of the same color between the speaker and the display. Connect speakers to the back of the display using supplied screws. 76 Appendix Specifications Display Panel Screen size Aspect ratio Number of pixels Pixel Pitch Luminance Power Source Input voltage Input current Inrush current Power consumption Stand-by Connection Connector Types 42" WVGA product 16:9 852 (H) x 480 (V) pixels 1. 095 mm (H) x 1. 110 mm (V) 700 cd/m2, at APL13% 100 ~ 240Vac, 50 / 60Hz 3. 8A 60A p-p/20ms Max. 380+/-10% Watts (at 110Vac/color bar pattern) 5 Watts Max. [. . . ]