User manual MAXI-COSI RODI XR

[. . . ] Dear parents Congratulations on your purchase of the Maxi-Cosi Rodi XR. Safety, comfort and user-friendliness played an important role throughout all stages of development of the Maxi-Cosi Rodi XR. This product meets the most stringent safety requirements. the Maxi-Cosi Rodi XR is optimised for side impact protection and extra user-friendliness. [. . . ] There is a red-marked opening under the armrests on the seat (lap belt) and red-marked belt hooks on the headrest (shoulder belt). Attaching and removing the backrest with the seat Place the backrest of the Maxi-Cosi Rodi XR on a flat surface with the front facing downward (2). Next, slide the seat at around a 50° angle into the hooks at the bottom of the backrest as shown in illustrations 2 and 3 (3). Push the seat downwards and under the backrest until they form a seat. The hooks on the lumbar supports will now fall into the openings in the armrests. continue pushing the backrest until you hear a "click" (4). The Maxi-Cosi Rodi XR can be disassembled by carrying out these instructions in reverse order. Grab hold of the headrest with one hand on top so that your fingers fit into the positioning handle. Squeeze the positioning handle and pull up on the headrest while pushing against the backrest with your other hand (5, 1/5, 2). ⷠOnce you have reached the desired height, release the positioning handle, thereby allowing it to click into the right position. The "Placing your child in the Maxi-Cosi Rodi XR" section describes how to determine the correct height of the headrest for your child. Adjusting the position of the shoulder supports The shoulder supports on the Maxi-Cosi Rodi XR can be adjusted into 2 different positions, depending on the size of the child. Grab hold of the shoulder supports and pull or push them into the desired position (6). We only recommend folding out the shoulder supports on the Maxi-Cosi Rodi XR if the space between the shoulders of the child and the shoulder supports is smaller on both sides than the thickness of your hand. This could be caused by thicker or thinner clothing or the fact that the child has grown. Installing the Maxi-Cosi Rodi XR in a car using the anchor Adjust the headrest on the passenger seat into the highest position. Place the anchor between the 2 bars of the headrest on the passenger seat (7). Once the anchor has been secured, both headrests can be adjusted into the desired positions. The anchor cannot be used if the passenger seat is not equipped with a headrest. The anchor is not an essential part of the safety of the child; it is only used to keep the Maxi-Cosi Rodi XR stable. Elastic tensioner: The elastic may lose its stretch in time. The elastic tensioner is used to create more tension in the elastic. [. . . ] Make sure to keep plastic wrapping material out of reach of your child in order to avoid the risk of suffocation. Packaging Product parts Cardboard box Plastic bag Fabric cover Plastic parts Metal parts Tether Belt buckle Paper waste Residual waste Residual waste In accordance with the typification of the appropriate container Container for metal Container for polyester Residual waste WARRANTY We guarantee that this product was manufactured in accordance with the current European safety requirements and quality standards which are applicable to this product, and that this product is free from defects in workmanship and material at the time of purchase. during the production process the product was subjected to various quality checks. If this product, despite our efforts, shows a material/manufacturing fault within the warranty period of 24 months, (with normal use as described in the user instructions) we will comply with the warranty terms and conditions. [. . . ]