User manual MAXTOR BARRACUDA 7200.9 SERIAL ATA INSTALLATION REV A 4-2006

[. . . ] · A SATA interface cable (sold separately). · A SATA-compatible power cable or adapter (sold separately). · A system with a SATA connector on it, or a SATA host adapter and available PCI slot in which to install the adapter. Refer to your computer system documentation to see if your system supports SATA on the motherboard and locate the SATA connector. [. . . ] To locate an article, go to http://support. microsoft. com and enter the article number in any search box on the Microsoft web site. For example, to view the Knowledgebase article for installing Windows XP on your new Seagate drive: 1. Open your browser and go to http://support. microsoft. com. Enter 313348 in the Microsoft web site's search box, and then press Enter. Locate and select the most accurate options from the search results. The article is displayed on your screen. Microsoft knowledgebase article numbers 313348. See also: 175761 defects are detected, this may be an indication of a problem. Verify that your system is SATA compatible. You need either a SATA 1. 0-compatible motherboard connector or Serial ATA host adapter to use this drive. I'm running Windows 98 and FDISK is not reporting the full capacity of my drive. You need to upgrade your version of FDISK if you are using the diskettes or CD that came with your original Windows 95 or 98 operating system. Microsoft provides a free downloadable FDISK upgrade. See Microsoft Knowledgebase article number 263044 located at http://support. microsoft. com. If these tips do not answer your question or solve the problem, contact your dealer or visit http://seatools. seagate. com to download SeaTools disc diagnostics software and more troubleshooting advice. Operating system Windows XP Windows 2000/NT Installing the drive in Mac OS X systems 1. Install the drive in your system using the instructions provided on the front of this installation guide. Insert the Mac OS X Install CD 1 (OS 10. 3 and earlier) or Install DVD (OS 10. 4). These operating system discs are provided by Apple and normally ship with Apple computers. Restart the computer while holding the C key (you can release the C key after you see the Apple logo appear on the screen). In Mac OS X 10. 4 or later, you must select your language after booting from these install discs. If the new drive you just installed is the only disc in your system (replacing the original hard disc drive), click on "continue" and follow the onscreen instructions to install OS X on your new drive. If the new drive you installed is not the only drive in your system, do not click on `continue. ' Instead, select Disk Utility from the Utilities menu located in the top menu area. [. . . ] Als Versorgungsspannugen werden benötigt: +5V +/- 5% 0, 64A; +12V +/- 5% 2, 8A 4. Die Versorgungsspannung muss SELV entsprechen. Alle Arbeiten auf dem Festplattte dürfen nur von Ausgebiletem Serciepersonal durchgeführt werden. Bitte entfernen Sie nicht die Aufschriftenschilder des Laufwerkes. [. . . ]