User manual MAXTOR BARRACUDA ES.2 SAS REV E 4-2009
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAXTOR BARRACUDA ES.2 SAS. We hope that this MAXTOR BARRACUDA ES.2 SAS user guide will be useful to you.
Lastmanuals help download the user guide MAXTOR BARRACUDA ES.2 SAS.
You may also download the following manuals related to this product:
MAXTOR BARRACUDA ES.2 SAS REV F (1805 ko)
Manual abstract: user guide MAXTOR BARRACUDA ES.2 SASREV E 4-2009
Detailed instructions for use are in the User's Guide.
[. . . ] Product Manual
Barracuda ES. 2 SAS
®
ST31000640SS ST3750630SS ST3500620SS
100496298 Rev. E April 2009
Copyright © 2008-2009 Seagate Technology LLC. E, April 2009 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda ES. 2, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. [. . . ] Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than two times per second. Non-operating The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive subjected to nonrepetitive shock not exceeding 80 Gs at a maximum duration of 11 msec (half sinewave) shall not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis. The drive subjected to nonrepetitive shock not exceeding 300 Gs at a maximum duration of 2 msec (half sinewave) does not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis. The drive subjected to nonrepetitive shock not exceeding 150 Gs at a maximum duration of 0. 5 msec (half sinewave) does not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis.
30
Barracuda ES. 2 SAS Product Manual, Rev. Packaged Disk drives shipped as loose load (not palletized) general freight will be packaged to withstand drops from heights as defined in the table below. For additional details refer to Seagate specifications 30190-001 (under 100 lbs/45 kg) or 30191-001 (over 100 lbs/45 Kg).
Package size Packaged/product weight Drop height
<600 cu in (<9, 800 cu cm) 600-1800 cu in (9, 800-19, 700 cu cm) >1800 cu in (>19, 700 cu cm) >600 cu in (>9, 800 cu cm)
Any 0-20 lb (0 to 9. 1 kg) 0-20 lb (0 to 9. 1 kg) 20-40 lb (9. 1 to 18. 1 kg)
60 in (1524 mm) 48 in (1219 mm) 42 in (1067 mm) 36 in (914 mm)
Drives packaged in single or multipacks with a gross weight of 20 pounds (8. 95 kg) or less by Seagate for general freight shipment shall withstand a drop test from 48 inches (1, 070 mm) against a concrete floor or equivalent.
Barracuda ES. 2 SAS Product Manual, Rev. Operating--normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding 5 - 22 Hz 22 - 350 Hz 350 - 500 Hz b. Operating--abnormal Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration not exceeding: 15 minutes of duration at major resonant frequency Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available. Operating abnormal translational random flat profile 5 - 500 Hz c. Non-operating The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding 5 - 22 Hz 2 Gs (0 to peak, linear, swept sine, 0. 5 octive/min) 22 - 350 Hz 350 - 500 Hz 5 Gs (0 to peak, linear, swept sine, 0. 5 octive/min) 2 Gs (0 to peak, linear, swept sine, 0. 5 octave/min) 0. 75 Gs (0 to peak) 0. 25 Gs, Limited displacement 0. 5 Gs 0. 25 Gs
Vibration may be applied in the X, Y, or Z axis.
Vibration may be applied in the X, Y, or Z axis. 6. 4. 5 Acoustics
Sound power during idle mode shall be 2. 9 bels typical when measured to ISO 7779 specification. Sound power while operating shall be 3. 2 bels typical when measured to ISO 7779 specification. [. . . ] Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presales@Seagate. com Technical Support: DiscSupport@Seagate. com Warranty Support: http://www. seagate. com/support/service/index. html mySeagate my. seagate. com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account functions. Submit pricing requests, orders and returns through a single, password-protected Web interface-anytime, anywhere in the world. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR BARRACUDA ES.2 SAS Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service. Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR BARRACUDA ES.2 SAS will begin.